Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Nontraditional joinery

Posts

Nontraditional joinery

#1

Nontraditional joinery

Clay Foster

>The base of this little table has nontraditional joinery. Each side is cut from a board milled from an old rail road tie, the edges beveled at 45 degrees, and then fastened with old baling wire. The railroad ties are Rhodesian teak.

The top is pecan, attached with the more traditional method of dowels.

46" long x 23" high x 7" wide


img

Re: Nontraditional joinery

#2

Detail of fasteners 

Clay Foster

>


img

Re: Nontraditional joinery

#3

Re: Detail of fasteners

Carol - now back in Dubuque, IA

>Incredible, Clay. Love the way your mind works.

Re: Nontraditional joinery

#4

Ellis Walentine

Very interesting...

Ellis Walentine

>Somehow I feel like Artie Shaw every time I say that...

Clay, as usual, your concept and execution are wonderful. I'm curious, though, as to how you work your dowel joinery so that it is appropriate for attaching the top to the base of this piece.

Also, what's the finish, and who's the customer?

Always curious,

Ellis

Re: Nontraditional joinery

#5

Re: Very interesting...

Clay Foster

>Thanks, Ellis.

I drill some holes in the top of the base using a drill press, and then use dowel hole center finders to mark where to drill holes in the top. It's a close grouping, so wood movement is not an issue, especially when everything is just wired together.

The finish is a couple of coats of tung oil, enough to bring out the color and grain, but hardly any shine.

This piece will be in a gallery in Santa Fe in a couple of weeks.

Re: Nontraditional joinery

#6

Re: Detail of fasteners

Clay Foster

>Thanks, Carol. It's a mystery to me.

Re: Nontraditional joinery

#7

Re: Nontraditional joinery

Rob Stokes in North Vancouver

>That's pretty cool - I admire the imagination and the execution. Nice.

Rob

Re: Nontraditional joinery

#8

Re: Detail of fasteners

Dick Coers

>That is a beauty!!!!! Did you think about using barb wire? Might add an interesting touch, as long as you don't get too close. Very nice, congrats!!!!

Re: Nontraditional joinery

#9

Re: Detail of fasteners

Clay Foster

>Thanks, Dick.

There's an abandoned farm just up the road from me. I call it the art supply store. I've been dragging it home bit by bit. No telling what parts of it will turn up in my work some day. I often think about the family that lived there originally, and how it must have been their dream home.

Re: Nontraditional joinery

#10

Re: Detail of fasteners

Dan Mitchell

>Clay - My inlaws have a round dining table, which used to have a cheesy, faux-marble top. Once while my wife & I were visiting, I leaned on the edge of the top, causing it to rise up on the opposite side. This startled me, and I quickly let the top fall back onto the base, whereupon it smashed into a million pieces. After I got over the shock, I was stunned to see the base was a gorgeous piece of light-colored driftwood, nearly 3' in diameter. The trunk of some long fallen tree. In several locations ~6" below the beautifully craggy surface and spanning the hollow center, there are numerous strands of barbed wire, embedded by years of growth, from where the tree had served post-duty on a fence row, probably of some old farm that has decades-since been converted into condos, or a Walmart, or something similar. It's a stunning artifact. The table now has glass top, and I always marvel over the base whenever we are there.

Dan