Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Bessey UniKlamps

Posts

Bessey UniKlamps

#1

Bessey UniKlamps

Kevin Mac Luskie

>Has anyone had any good/bad experience with these "light duty" clamps from Bessey? They are cheaper than the new,(or old) K-body clamps. I'm thinking about getting some for assembling stair treads, but don't want to waste money if they don't work well.

http://www.besseytools.com/products/wood/UniKlamp.php

Thanks.

-Kevin

Re: Bessey UniKlamps

#2

Re: Bessey UniKlamps

Brent in Montreal

>Hi Kevin,

They do work well, but on smaller projects. I use them on boxes or where no real clamping strength is needed (trim etc.). They won't give you anywhere near the clamping power of a K-body.

Re: Bessey UniKlamps

#3

Re: Bessey UniKlamps

Thomas Skaggs, Foothills of Mount Level

>I have some. They do the job. They are not as robust as K-bodies but they work much the same. On the other hand they are not as heavy either and there have been some times when that was a good thing. The only negative I can think of is that the handle is a little skinny which makes them a bit harder on the hand to tighten.

Tom

Re: Bessey UniKlamps

#4

Jim DeLaney, Austintown, Ohio

Re: Bessey UniKlamps

Jim DeLaney, Austintown, Ohio

>I like them. They're great for smaller projects - boxes, etc. I have four each of 6", 12", and 18", plus some extra 6" ones that I use for things like holding the fence on my router table, holding my dovetail jig to the benchtop, etc.

I actually find that I'm using them more frequently that I am the full sized K-bodies.

BTW, the best prices I've found on them has been at Hartville Hardware.

Jim D.

Re: Bessey UniKlamps

#5

Re: Bessey UniKlamps

George@Colonel's Workshop-Havertown PA

>Good Morning Kevin,

I bought a pair of the 12 1/2" size. They do work, and the jaws are parallel. They have the same aggrevating feature of the other Bessey offerings, in that the rear jaw retreats while you tighten an overly small handle. You must therefore put pressure on the metal lock to cause it to engage the bar as you turn. I think they are okay clamps, and are over priced for what you get. I generally use F type clamps which I pick up on sale at Harbor Freight for about $2.99 each for the 12 inchers.

George

Re: Bessey UniKlamps

#6

Re: Bessey UniKlamps

Kevin Mac Luskie

>Thanks everyone for the feedback. Sounds like they might work well for what I need to do.

-Kevin