Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Printing on wood

Posts

Printing on wood

#1

Printing on wood

Mark Kauder, Phenix City, AL

>Somewhere, sometime, I saw packages of veneer that you can run through a straight paper path laser or ink jet printer.

Anyone know a/the source?

Thanks

Mark

Re: Printing on wood

#2

Re: Printing on wood *LINK*

waroland

>I found this with Google search.


Printable

Re: Printing on wood

#3

Re: Printing on wood

Steven Bellner

>Mark,

What are you trying to accomplish? I have had really good luck printing a mirror-image of my output to a laser printer, and then using an iron to transfer the image from the paper to the wood. This is useful form transferring patterns, or block text which I intend to route out form making various types of signs.

Of course, this requires your software (or printer driver) to be able to pring mirror-images. If your are fortunate to have this feature, this method works phenomonelly well.

Re: Printing on wood

#4

Re: Printing on wood

Pete LaBelle

>Do a search for "wood business cards". There's a place near Grand Rapids, MI that prints micro-ply business cards, and seems they offered laser printer sheets for other uses.

Re: Printing on wood

#5

Hey Mark,

Gary Evans Tallassee, TN

>I got nothing for you on the veneer thing. I just wanted to say hi. It's good to see you posting again.

Gary

Re: Printing on wood

#6

Re: Hey Mark,

Mark Kauder, Phenix City, AL

>Thanks, Gary.

I lurk through every couple of week, but Life has gotten in the way of much posting.

I will be at Unicoi Fri and Sat. I assume you will be there.

Mark

Re: Printing on wood

#7

Re: Printing on wood

Mark Kauder, Phenix City, AL

>Thanks, guess I did not dig deep enough into my google search.

Mark

Re: Printing on wood

#8

Re: Printing on wood

Mark Kauder, Phenix City, AL

>thanks, actually my pattern in symetrical, but I can mirror stuff in Corel Draw.

I am trying to get some lines on a trophy plaque, rather than spend the money on laser engraving or the time to burn the lines.

I have been trying the laser printing transfer, but works for a pattern, but not dark enough for what I need.

Thanks,

Mark

Re: Printing on wood

#9

Re: Printing on wood

Mark Mandell - Gone Round In Jersey

>Tried printing in BOLD?

Nice to have you back. How's the roof?

mm

Re: Printing on wood

#10

Re: Hey Mark,

Gary Evans Tallassee, TN

>Unfortunately, no.

I've gotten involved in a different line of work. I'm not selling turning wood anymore, though I have lots to give away if you get up this direction.

Gary