>I have been given a laptop computer that may be infected with one or more viruses plus sensitive information belonging to the previous owner. My question, can I do complete restore and remove the viruses and the sensitive info or do I need to do something more? Thanks for the help.
>If you don't need to keep the sensitive info then you can do a complete wipe and reinstall of windows. What kind of laptop? Usually you can get a restore disk that is supplied by the laptop maker.
>If by doing a complete restore you mean going back to an earlier restore point, I'd say no way. If you mean totally getting rid of the old disk partition, creating a new partition, formatting it, and re-installing Windows, I'd say yes. You'll need the disks from the manufacturer that should have come with the computer with the operating system, hardware drivers, and software programs for that computer. Otherwise, you'll need a new copy of XP and the ability to hunt down and install the correct drivers. Wiping the hard drive clean is the best way to go. It's not unusual for restore points to be infected with the same virus that's plaguing the computer now.
>Reinstall Windows with disk reformat. After that create an user account with Limited User type and use it for everyday tasks. Leave Administrator acount for administrative tasks only. This will save you from viruses.
>Sounds like you need to reformat the hard drive and re-install Windows. With some computers it's not too hard. It depends on the make and model. Many come with a set of CD's or a DVD that will do it all for you including formatting the hard drive, reinstalling Windows and any installing necessary drivers. Hewlett Packard and Dell's are the easiest, as you can go to their website with the model/serial number and get what you need.
>Before you start, if you are able, start the computer, either in regular mode or safe mode, and (assuming WindowxXP) go to Start > Control Panel > Adminsitrative Tools > Computer Management > Device Manger.
There you will be able to get a complete list of all the hardware components you have on your computer. Write done (in detail) the information, expecially the Network, Video and Audio devices.
This will help you greatly after you install Windows in the event you have trouble with any devices not having the correct drivers. The number one problems are: you can't access the network (or internet) because you don't have the proper network drivers installed, or the video looks bad or there is no sound because the vide or aduio drivers are missign or wrong.
You'll need to go to another computer and download the proper drivers from the manufactures website. Because the use up to a half dozen different network cards in any one model of computer, you may have a really hard time figuring out whihc is the correct on to load if you didn't write down the details before you started the reformat.
>Mark, I just wiped clean and loaded a fresh copy of XP on a desktop computer for a customer recently that didn't have the original disks. What I did to remember the various hardware components exactly was take a picture of the Device Manager screen and save it on a USB memory stick.
Open Device Manager, expand the items you need to know about (video, network adapter, sound, CD/DVD drive, etc.), make sure they can be seen on the screen after expanding the items needed in the hardware listing, then hit the Print Screen key on the keyboard. Open Windows Paint program and paste the image from the clipboard and save it.
Now you have a picture to look back on when chasing down the right drivers for the hardware. I needed video, sound, and network adapter drivers and found them all by looking on the manufacturer's Website and a few Google searches.
A picture is worth a thousand words and comes in handy when you need to know exactly what the original setup was.
>I always get a screen-shot and either save it or print it. But I was hesitant to give Clyde too many steps on a computer that might be infected or having problems that might cause him extra frustration.
>I've been using a small utility called "Screenpik" to do this very same thing for years. The nice thing about it is you can define the area (like a dialog box) which you want to save. Didn't know about the print screen approach, a good alternative. Either way, it's fast, easy to save/print, dead-on accurate + sure beats the heck out of writing such things down.
>Sorry for the late response, been away from the computer for awhile. The computer is a HP Compaq NX5000. All of the responses have been a lot of help, I really appreciate the collective help.