Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Router Base

Posts

Router Base

#1

Router Base

Bill P

>I just got my Leigh D4R dovetail jig assembled. Here are some photos of my first attempt with it. All went well except that I found out my router base is not completely flat. Is there any after market bases out there for a Bosch 1617 EVS? I have to order a template guide adapter anyway, and I thought I could get both at the same time. Thanks Bill


img

Re: Router Base

#2

Re: Router Base

Bill P

>Here is the picture of my first attempt. You can see the gaps from what I assume is caused by a wobbly base. Bill


img

Re: Router Base

#3

Re: Router Base

RONALD.KNAPP

>Check with a Bosch Service Center. They might replace it.

Re: Router Base

#4

Re: Router Base

Fred Davis

>Bill,

I have always used Stanley, then Bosch routers and that is the worst base for being out of flat I ever seen.

If you contact Chris Carlson at Skil/Bosch he would be interested in that picture and would fix the problem.

FredD

Re: Router Base

#5

Intelli base *LINK*

Scott in Montana

>Hello Bill,

I use the Intelli clear acrylic universal router base on several Bosch 1618's (D-handle version of the 1617). This base is compatible with the more popular Porter Cable guide bushings and very accurately made. It's available at the Jig Store; I've put a link below. They're also an Akeda dovetail jig distributor.

Scott


The Jig Store, Intelli clear router base

Re: Router Base

#6

Non-flat Bosch 1617 base

GolfSteve in Calgary

>My Bosch router also had a very non-flat base. I replaced the plastic base with a home-made base made from ~3/8" thick polycarbonate (which I could get at work for free). It took a Saturday to make two bases, but hopefully that's a one-off job.

I asked a Bosch repair depot about the base and they looked at me with big blank brown cow eyes wondering why it might matter that the base isn't completely flat. I guess that might be true if you're rounding over the edges of 2x4's, but it makes a difference in the type of work we do.

Re: Router Base

#7

Re: Router Base

Jay St. Peter - SoMD

>I got a couple Pat Warner bases for my 1617. I got an offset base and a round one that accepts PC guide bushings. Keep in mind that anything that fits the PC 690 series will fit the fixed base as it has 2 sets of screws in the bottom and one of them is PC compatible.

Jay