Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

OT: Accessing silicone in used tubes

Posts

OT: Accessing silicone in used tubes

#1

OT: Accessing silicone in used tubes

Dan Mitchell

>Heres one that always ticks me off. You spent 6 bucks or so on a tube of silicone sealant, the kind for a caulking gun. You only use a portion, then some weeks later go to use the rest. But you know it's going to be a major PITA to get the slug of cured sealant out of the nozzle, so you can get it to flow again. Capping the tube makes no difference. I generally end up plunging a long, thin screwdriver in & out of the nozzle, maybe alternating a pair of skinny hemostats, trying to pick out bits of the plug, all the while squeezing the handle so hard my hand cramps up. And of course, the tube being TAPERED, it's even more difficult. The first 30 or 40 attempts, all I manage is to push the plug BACK further, so I get a tantalizing dribble of silicone, then nothing again. After about an hour of this messy wrestling match, I generally get the plug out, or at least enough of it to get the silicone to flow in a usable manner. Til next time, that is. Is there a better way???

Dan

Re: OT: Accessing silicone in used tubes

#2

Dale Lenz

Re: What I've done in the past

Dale Lenz

>Screw a 3" drywall screw down the cured silicone and pull the screw with cured plug out with pliers. Sometimes need to do this more than once. Best thing I've found that works.

Re: OT: Accessing silicone in used tubes

#3

Yup. The wine bottle technique

Dan Mitchell

>I've tried that one too, it does work sometimes.

Hey! How about they design the nozzle of the tube so that the outer tapered part unscrews, so you can remove it & easily get the plug out?

Oh yeah, then they wouldn't sell all those tubes people buy to replace the perfectly good sealant they toss out because they can't get to it...

Dan

Re: OT: Accessing silicone in used tubes

#4

Re: OT: Accessing silicone in used tubes

Barry Irby

>They used to make the silicon tubes with screw on nozzles. You could unscrew it and push out the tapered plug and screw it on again and have at it. I have not looked, but I don't remember seeing such a thing in a long time.

Now, I cut some of the tip off, force a slightly oversized drill bit in and drill out the plug while applying pressure with the handle.

If that fails, I drill a hole in the side of the tube and squeeze the silicon out the hole. Then I get it all over everything, ruin a couple of towels, curse, rant, rave and then go buy a new tube to start the process again.

Re: OT: Accessing silicone in used tubes

#5

Re: silicone in used tubes

Galen V

>What I do if I try to keep for a while.

If the tube purchased had a cap I put a finger full of Vaseline in the cap and push it on. Makes a better moisture proof seal since moisture cures the silicone.

If no cap, coat the tip end with Vaseline and wrap tip with folded over Handi-wrap with rubber band to hold and squeeze out enough silcone to make a plug over end. If this sets for a while at least if the outer plug hardens it can pull the plug out of the tube,sometimes!

Re: OT: Accessing silicone in used tubes

#6

Jason Roehl in Lafayette, IN

I've used...

Jason Roehl in Lafayette, IN

>sealants for log homes (multiple cases of $12/tube stuff at a time) that actually comes with the nozzles separate. I would only replace them when they wore out, not when the tube was empty, I would just unscrew the nozzle off the empty tube, put it on the new one and caulk on. (This wasn't chinking, either, it was textured caulk for corners, cracks and the like, but very similar to some of the chinking products that are available).

Jason

Re: OT: Accessing silicone in used tubes

#7

Check nozzle caps  *LINK*

Alex Grigoriev

>


Nozzle caps

Re: OT: Accessing silicone in used tubes

#8

Dale Lenz

Re: Have you tried these?

Dale Lenz

>

Re: OT: Accessing silicone in used tubes

#9

Re: Have you tried these?

Fred Davis

>If you ever tried PolySeamfil, you would wonder why you didn't try it before.

Far better then Silicone, cleans up with water ,powerful adhesive, takes paint perfect and you screw a Blue or Gray wire nut on the end after use and it's ready the next time.

For those of you into Self-Flagellation, forget I said anything.

FredD

Re: OT: Accessing silicone in used tubes

#10

Jesper, Denmark

Re: Simple.....

Jesper, Denmark

>Only buy silicone in cartridges with a screwed-on plastic nozzle. Leave it on after use. The silicone will only cure about 3/4 inch in from the nozzle tip.

For the next use, unscrew and press the plug out with a nail. Screw the nozzle on and use.

Repeat as necessary.

Re: OT: Accessing silicone in used tubes

#11

Re: Yup. The wine bottle technique

Kneale Brownson dreaming of snow in N. MI

>When Dow first developed the silicone sealer system in caulking gun tubes, they came with a screw-in spout that had a snap-on cover with a screw thread that you could reverse and screw into the fitting on the tube. The dried plug could be pulled from the spout's larger end fairly easily. Of course, when they sold off the system, DAP altered the tube construction.

Re: OT: Accessing silicone in used tubes

#12

I've used the LV caps.

Kneale Brownson dreaming of snow in N. MI

>Not very effective on opened silicone tubes. Very useful for roof cement in tubes and other caulking products, but not silicone.

Re: OT: Accessing silicone in used tubes

#13

Re: OT: Accessing silicone in used tubes

Claudia Hayward

>I've used the Dow Corning sealant 732 for many years. I refuse to buy any of the others because they don't come with a screw on nozzle. The Dow is a bit more money than the likes of Dap but worth a whole lot more in lack of wastage and frustration! Besides the Dow does a great job and lasts for years.

Re: OT: Accessing silicone in used tubes

#14

Silicon ? Silicone?

Pete LaBelle

>A pet peeve of mine, but the two get confused frequently.

Silicone (with an "E") is pronounced with a long "O" and is the rubbery stuff.

Silicon (without an "E") is pronounced with a short "O" and is stuff electronic chips are made from.

Re: OT: Accessing silicone in used tubes

#15

Re: I've used the LV caps.

Alexander Grigoriev

>AFter you put the cap on, squeeze a little bit of silicone to form a blob. When next time you take the cap (and the blob) off, it will be easier to get to uncured part.

Re: OT: Accessing silicone in used tubes

#16

Dale Lenz

Re: Guess...

Dale Lenz

>I'll look closer next time I'm shopping for silicone. Either the silicone tubes has no replaceable caps or the snap on caps. The only screw on caps I can think of is the hand squeeze tubes, not the 10 oz or what ever size chalking gun tubes. Thanks for the information.

Re: OT: Accessing silicone in used tubes

#17

Never heard of it

Dan Mitchell

>But I'll definitely check it out, thanks for the tip

Re: OT: Accessing silicone in used tubes

#18

Re: Never heard of it

Fred Davis

>Dan,

If your local hardware does not stock it , ask then too, they will be glad at the increase in caulking sales after awhile.

YOu can get it in clear, several shades of white and colors.

This has been around since at least the sevenities and I stll see some Glazers use Glazing compound that was the standard long before Silicone came along, talk about resisting change!

The old glazing compounds were mastic and hard as hell to get out of a caulking tube, especially if the air was cold.

FredD

Re: OT: Accessing silicone in used tubes

#19

Re: Old Glazers

Galen V

>I'll use that "new" stuff out of a tube where it's needs to be used but give me an old wood sash window and I'll go back to a can of glazing compound I can work in my hands to mix back in the linseed oil and soften it to apply with a good polished putty knife. Yep they still make for use old timers.

Could not resist showing my age.

Think it has to do with the fact my uncle who raised me owned a small lumber yard that one of the services was to reglaze wood sash windows. From about 5 years on I was the one who worked the putty so he could apply. Must have gotten into my blood real deep.

Re: OT: Accessing silicone in used tubes

#20

Re: Old Glazers

Fred Davis

>Linseed oil base window putty is just that , window putty and has a rapidly fading field of use.

The PolySeamFil I mentioned is a Architectural grade caulking compound that surpasses Silicone in every use from general caulking requirements to joints around toilets , tubs, sinks , not to mention it is a fast setting, extremely strong adhesive I have for instance used to attach mirrors to walls permanently .

At my age Galen, I adopt methods and materials that clearly are a improvement over what I had used for fifty plus years.

Very few come along that aren't more a product of Madison Avenue winddbags then truly innovative products.

Take Lacquer and Shellac for instance, the manufacturers have improved the product , but they have not satisfactorily replaced them.

but I digress,

Fred D

Re: OT: Accessing silicone in used tubes

#21

Dale Lenz

Re: PolySeamfil

Dale Lenz

>I've Googled PolySeamfil and don't find a thing. Google suggest: Polyseamseal, is Polyseamseal what you are referring too?

Re: OT: Accessing silicone in used tubes

#22

Re: PolySeamfil

Fred Davis

>Yes,

your right Dale, beats me where my head is sometimes tho I do use PolySeamSeal to "fill" seams a lot ;-))

FredD

Re: OT: Accessing silicone in used tubes

#23

Dale Lenz

Re: PolySeamfil *LINK*

Dale Lenz

>The Polyseamseal in the link below, claims to be 100% silcone. Is there another type you are referring too?


Polyseamseal

Re: OT: Accessing silicone in used tubes

#24

Re: PolySeamSeal *LINK*

Bob Entwisle in NJ

>They make all kinds of caulk, not just silicone.


http://www.polyseamseal.com/

Re: OT: Accessing silicone in used tubes

#25

Dale Lenz

Re: Thanks, Bob....

Dale Lenz

>They don't sell it near me anyway,come to find out. Dale