Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

green wood

Posts

green wood

#1

green wood

P. C.

>I am tring to turn some green beech wood. It is cracking badly. Also, do I wait for the wood to dry before I put the finish on it. Would I have been better of letting the wood dry before trying to turn it.

Re: green wood

#2

JL

Re: green wood

JL

>First - post over on the Turning side - you'll get more responses.

Second - describe what you are doing more completely - i.e. what type of turning (bowl, platter) and how you are orienting it in your turning blank.

I mostly turn spindles (and kiln dried at that) and mostly turn maple and white oak green.

Re: green wood

#3

Re: green wood

Keith Newton, LR, Arkansas------WebKitFormBoundary

>Keep a spray bottle handy to spray water on it while you turn green.

When you get finished, put it in a paper bag to slow the drying down.

Re: green wood

#4

Re: green wood

Don Orr

>Beech is notorious for cracking and warping when turning green. I have given up using it for much. Large pieces are especially bad. I'll still use it for small things like mortar and pestles, but it is not worth fighting it to me. A lot of people think it is a bland and boring wood, but I disagree. It's a nice tight grain wood that is good for cooking utensils like spatulas and spoons.