Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Anyone have this rockler dovetail jig? *LINK*

Posts

Anyone have this rockler dovetail jig? *LINK*

#1

Anyone have this rockler dovetail jig? *LINK*

Dan Mitchell

>On sale for $139.99 with dust collector 22224 & set up jig 24118


http://www.rockler.com/product.cfm?page=17367&filt

Re: Anyone have this rockler dovetail jig? *LINK*

#2

Re: Anyone have this rockler dovetail jig?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dan,

I don't want to be unfair, so forgive me if it comes across that way.

I just gave one away which looked like the same, or nearly the same, jig I acquired years ago for about $50.00. It worked, but I was never satisfied with its performance. I thought set ups were a bear, but it was accurate once the pain was past. While this Rockler looks like a knock-off, it may be an entirely new jig, wonderfully engineered and produced, and guaranteed to be the cat's meow. However, I suggest you look at other 12" to 18" competitive fixtures. I use a P+C #4212. Keller and Leigh have great stuff also.

Re: Anyone have this rockler dovetail jig? *LINK*

#3

Re: Anyone have this rockler dovetail jig?

Chuck in ND

>I have a Porter-Cable jig also and I'm happy with it.

Re: Anyone have this rockler dovetail jig? *LINK*

#4

Re: Anyone have this rockler dovetail jig? *LINK*

albertabob

>I have one similar that I am selling on craigslist.


dovetail jig

Re: Anyone have this rockler dovetail jig? *LINK*

#5

Re: Anyone have this rockler dovetail jig?

Dan Mitchell

>Thanks for the replies. I had been leaning towards the PC, but with the Rockler on sale, thought I'd check for experiences.

Ever notice that with all the "sales", "coupons", & other "deals" at Rockler & Woodcraft, certain things are ALWAYS excluded.

You know, the ones you want to BUY.

PC jigs are on that list.

Re: Anyone have this rockler dovetail jig? *LINK*

#6

Re: Anyone have this rockler dovetail jig?

Lee Schierer - McKean, PA

>I have that jig and it was a definite step up from my Craftsman jig. I don't regret buying it. FOr my hobby use it fitts the need and tool budget just fine. It did take a bit of learning to get the set up right, but it does an excellent job once it is set up. On mine, the locking handles were installed backwards so they locked by pushing the handle up instead of down. In their original locking mode the vibration from the router and gravity would cause them to come unlocked. Once I turned the handles 180 they have never unlocaked on their own.

One feature I don't like on mine that may have been corrected is the side locator adjustment screws are under the clamping bars and cannot be loosened to adjust the location of the tails on the width of the boards without taking off the clamping bars.

If you have a tall router like the Freud FT series, it may be too top heavy to work well with the jig. I use an older Craftsman router with mine, but a PC 690 or 693 or similar router would work well.

Lee

Re: Anyone have this rockler dovetail jig? *LINK*

#7

Thanks Lee!

Dan Mitchell

>

Re: Anyone have this rockler dovetail jig? *LINK*

#8

Re: Anyone have this rockler dovetail jig?

GaryMc

>Lee, FWIW I have heard they corrected the screw location problem in this version, as well as adding some of the setup bells and whistles of the PC4212. I too have the older one (with 4 screws per stop - new one has 3), PITA to adjust until I made an offset wrench for them. On sale - could be they are coming out with an "improved" version.

I have used the jig quite a bit, never had much problem with setup once some decent manuals (Woodhaven, Grizzly, even PC) were downloaded. The little setup jig works pretty well to get it *close* on the first try.

Free shipping thru 08/30 might swing the vote.