Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Wiring Lights in Shop

Posts

Wiring Lights in Shop

#1

Wiring Lights in Shop

howard

>The ceiling in my new shop is 10', so far I have hung 3 8' strip lights. My question is a young electrician told me a while ago that it's ok to run romex on the ceiling of a garage. It's certainly easier than having to use EMT or BX. Do you agree with this??? Thanks for your help.

Re: Wiring Lights in Shop

#2

BIL ('lectric Co.) . . .

steve mackay

>makes me run yellow Romex EVERYWHERE (except where it could be 220). Just forget white and upgrade from the get-go. His only other hang-up is,even if you might cover with dry-wall later, if its exposed NOW put it in conduit. It might be awhile before you cover / enclose it. Spend the money NOW with over-kill rather than more money latter with replaceing. Have'nt been sorry yet.

Re: Wiring Lights in Shop

#3

Re: Wiring Lights in Shop

Fred Davis

>when I was contracting, (last was several years ago) in CA jurisdictions varied slightly on this issue.

Nearly all allowed exposed cable (Romex) above eight feet in a attached garage, if there were living quarters above , then it had to be in a chase , Emt , Flex or inside the finished ceiling.

Some jurisdictions like San Francisco and South down the peninsula to San Mateo county required Greenfield ( loaded Flex) because of the hysteria surrounding the 1906 quake.

That being said , I personally don't like exposed Romex anywhere in a residential setting or your home shop for a variety of reasons from fire considerations to cosmetic appearances.

FredD

Re: Wiring Lights in Shop

#4

EMT is so cheap and looks so much better

Mark Goodall - ATL - tooljunkie

>

Re: Wiring Lights in Shop

#5

Re: Wiring Lights in Shop

Clint Searl, at the base of Haycock Mtn

>First, check your local code. Unless the local code requires it and the job is going to be inspected, there doesn't seem to be a compelling reason to close in the wiring or run EMT.

Clint

Re: Wiring Lights in Shop

#6

Re: Wiring Lights in Shop

PhilB in Jersey

>I was always told that you cannot run romex inside conduit, that you had to pull individual strands for what you needed. ?

Re: Wiring Lights in Shop

#7

Re: Wiring Lights in Shop

Fred Davis

>your correct, you run THHN inside of the EMT which is a grade of stranded wire.

FredD