Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

The almighty Powermatic Not so...

Posts

The almighty Powermatic Not so...

#1

The almighty Powermatic Not so...

Dwain Lakeland FL

>If you recall my last post pertaining to the first attempted delivery of my PM 2000 that arrived damaged and wrapped in what I would call the equivalent of one ply toilet paper in the freight world a sheet of card board wrapped around the cabinet portion, and I refused it.

Well here is my latest experiece, and needless to say it wasn't great, but as they say everything happens for a reason. I just saw the video of the new Delta table saw and the fact that things didn't work out with Powermatic is starting to look like a blessing.

Message :

I cannot believe this. The first time the tablesaw I ordered arrived damaged, so I refused the shipment and decided to give it another chance, and I cannot believe it. This time all the accessories showed up with the saw missing and again I refused the delivery. I cannot believe this. This order is costing me in more ways than one. I'm making payments to my credit card for a purchase that I've yet to recieve, I'm taking time off of work to recieve the delivery. It must be an omen and I'm taking it that way. I will be calling Amazon to cancel the order and rightfully so because I just saw a couple of days ago that Delta is about to release a new saw. Hopefully it will offer the same features as the PM 2000 with som improvements because I'm about fed up with your company and its crackerjack operation.

And to be fair I equally fault Amazon.

Re: The almighty Powermatic Not so...

#2

That's more of an Amazon thing than PM

Eddie Pacheco: San Jose, Ca,

>I bet if you had purchased the saw from a local, to you, distributor you would not have gotten a damaged saw or such a runaround. Albeit at a hight price.... Who knows where Amazon gets their merchandise once we place an order. They have to be grinding someone down on price to arrive at the final cost they offer. I'm not a PM owner, but I have done business with Amazon.

Regarding that "new" Delta cabinet saw. Gee, you think that if they were going redesign the trunnion (sp) assembly they would have found a way to kick down some money to SawStop for licensing of their active control blade stop and trunnion assembly. How hard would that have been?

You know, sort of like "Intel Inside" it would be "Sawstop Inside".

I am a Delta power tool owner.

Re: The almighty Powermatic Not so...

#3

I agree it is not a PM problem

Dustmaker Mike

>it is the supplier and the shipper that are causing the problems you are having. PM makes and ships the product to supplier warehouses then they get shipped to you. The middle man is the cause of this problem. Call Amazon and complain if you feel you are getting a run around not the Manufacture of the product you are buying. They did not scratch it. I bet the PM that arrived with the scratches would have worked just fine. I understand you bought a new saw, and want a clean unscratched saw, but the paint don't make the cut.

I work for a manufacture of a different style equipment (medical equipment)and just got done replacing over $100,000.00 worth of damaged parts to 5 different systems ($500,000.00 a piece+ per system) because of a shipper that decided to load a pallet on top of them and ship them cross country. Right on the top and all four sides it states do not place anything on top this side up. I could tell you a lot of stories about damaged in shipping equipment, but they all come down to the shipper or the warehouse they where stored in. What I am trying to say is blame the correct party the shipper or the warehouse that stored it not the MFG they are not send out scratched and dented stuff unless you are buying scratch and dent sale items.

Rant Off

Re: The almighty Powermatic Not so...

#4

Re: The almighty Powermatic Not so...

Ray Newman

>Don't want to rain on your parade, but the new Delta Unisaw will not be out until early 2009:

"The saws are scheduled to be available for purchase in early 2009 with pricing yet to be determined."

http://popularwoodworking.com/articledisplay?id=17748

Video of new Unisaw @:

http://popularwoodworking.com/unisaw

Re: The almighty Powermatic Not so...

#5

Re: I agree it is not a PM problem

Dwain Lakeland

>Mike,

I'm sorry but I can't fully agree with you. Especially on the point of accepting a scratch because it don't make the cut.

Let me put it to you like this. Lets say you just purchased a brand new car do you feel that you should accept the car off the lot that has been keyed? Afterall the scratch won't affect the perfomance of the car. I don't think so. So based on that I can't swallow your point. Sorry.

I'm a quality engineer and I gotta tell you all parties fell short in my opinion and that's all I gotta say.

Re: The almighty Powermatic Not so...

#6

Did the company send the car

Dustmaker Mike

>with the scratch or did it happen after it was sent to the dealer and on their lot? If you are a quality engineer then you know you don't send the broke stuff to sell you send the stuff that has made the quality standards you put in place. After you ship it are you responsible for the care and handling or is the shipper you trusted to deliver it safely? I still believe the shipper is at fault not the MFG. Have a Great Night

Re: The almighty Powermatic Not so...

#7

Why not buy local and avoid all of this?

Scott in Montana

>The Powermatic website says there are six Lakeland, Florida dealers selling the PM2000. Why not buy from them?

Even my local dealer here in rural Montana has PM2000's priced comparably to Amazon. And that price includes assembly.

If you are dissatisfied with all of the dealers in your area, it seems to me that this should be your complaint to Powermatic.

Scott in Montana

Re: The almighty Powermatic Not so...

#8

Re: Did the company send the car

Dwain Lakeland

>The points your making are all valid points but not from the perspective of the end of line customer, and that's the point I'm making.

As the person reaching in to his or her pocket it is in material as to where the damage occured all that matters at that point in time is whether they will accept the faulty merchandise.

The person that should be concerned the most about where in the manufacturing/supply chain the dammage occured is those parties not the customer. If the customer chooses to accept the merchandise with knowledge of the damage then they should be prepaired to live with it.

And that's how I see it.

Re: The almighty Powermatic Not so...

#9

Some recent experiences

Dan Mitchell

>Dwain - I can empathize with how you feel. Today, my wife & I drove up to Bellingham, WA (about 150 miles, total) to the Grizzly warehouse to pick up a bandsaw. Below is a picture of a nasty scratch which was on the fence when I took it out of the box. It's actually a bit worse/less superficial than it appears in the picture. The box was intact, the fence still in its bag, face-down against the Styrofoam tray. This piece was put in the box this way at the factory in China. The rest of the saw looks beautiful (though I have not assembled it yet to check that everything is flat, etc.), and NO, the scratch will not affect sawdust production, but I cannot help but feel a bit soured on my new acquisition because of this admittedly cosmetic flaw.

I paid full price, I expect PERFECT.

Having said that, I'm not going to drive back up to get a replacement.

On the PM2000, I bought mine from the locally-owned Woodcraft, and it arrived (delivered by the store) in perfect condition. I see Amazon has this saw now for $2499.99, so does Woodcraft, both with free shipping, though I'm not sure if the shipping part would hold if you bought it at a local Woodcraft dealer.

This isn't to say my Woodcraft experiences have been perfect, far from it. A number of months back, I picked up a General 6" jointer from them. Like most, it comes in 2 boxes, top & base. The base was fine, but when I opened the box, I discovered that the top had been used & returned. Not only was if full of chips, all 3 blades were badly nicked. I ended up getting a different brand (PM) which the store delivered, picking up the used one, but this was some weeks later & a PITA all around.

If you think you'd rather hold out for the Unisaw, I think you should. I haven't personally heard the new Uni's selling price quoted anywhere; it may well be more than the PM. I do like the Uni's riving knife, which can be adjusted for through cuts from the front of the saw. The handle position is more convenient, I suppose, but not a deal-maker for me.

Sadly, awful retail experiences are not limited to woodworking machines. I recently replaced our dishwasher. Bought a well-rated KitchenAid at Best Buy. The door seal leaked a bit. So, I went back & "upgraded" to a slightly more expensive example of another brand, a model which was "special order", taking about 2 weeks to get delivered. They sent not one, but TWO which were extremely damaged (major dents rendering the tub unusable) BENEATH the packing. Each time, I had to be here to wait for the machine, with the original KitchenAid (which I kept to use in the meantime) removed. After the 2nd damaged replacement, I went back & re-ordered another of the KitchenAid. In other words, I was here for FOUR deliveries, and ended up removing & installing the dishwasher FOUR TIMES. And the bungling wasn't over yet. Since the KitchenAid was "no longer on sale", they actually wanted to charge me MORE for it, a situation which took 2 calls and a store visit to clear up. No "I'm sorry", let alone a "Here's a $25 gift card for your trouble".

So, from 3 very different sorts of retailers (Grizzly, locally owned Woodcraft, Best Buy) some very unpredictable & trouble-prone outcomes. Let's face it, people screw up. A LOT. Sometimes I'm astounded the world functions as well as it DOES.

Dan


img

Re: The almighty Powermatic Not so...

#10

Tools aren't always tools

Mark Goodall - ATL - tooljunkie

>A new tablesaw can be like a car, or it can be like a truck. A hobbiest might see his new tablesaw like he would his car, and a scratch on it might not be acceptable. A cabinetshop owner, might see the new tablesaw like he would his delivery truck, and a scratch isn't as important since he know's it will be scratched up in no time anyways.

I'm one of the people who see my tablesaw as the Porche that I can never afford. And so what it looks like is important.

But I can see how someone else who see's their saw differently, so accepting a scratched saw in turn for a discount, would be just as attractive.

Just depends on your point of view.

Think of a GI versus a Soccer Mom. They would probably each see a Hummer differently ;)

Happy Woodworking!

Re: The almighty Powermatic Not so...

#11

Re: Why not buy local and avoid all of this?

Chuck in ND

>I'd have to agree with Scott.

Re: The almighty Powermatic Not so...

#12

Added benefits

Mark Goodall - ATL - tooljunkie

>After discovering Redmond Machinery here, I bought my machines from them. One of the benefits is delivery.

I remember partially diassembling a jointer, a large drill press, and a dust collecter (not at the same time) to be able to fit into the truck of my car. Carpetted turnk and soft blankets. Talk about babying a machine :)

One at least on occasions one of the guys strapped a bandsaw into his pickup truck and drove it to my house on his way home.

Happy Woodworking!

Re: The almighty Powermatic Not so...

#13

Valid point...

paul in AZ

>about circumstances dictating acceptability of cosmetic flaws.

But, unless there is sufficient financial incentive to accept a damaged tool [or whatever], I want to be the one to put the dings in if I'm paying full price for a brand new item.

Re: The almighty Powermatic Not so...

#14

Re: Why not buy local and avoid all of this?

John K Jordan

>All this is why I prefer to buy locally. My local dealer (Knoxville Woodcraft) has always provided competitive pricing, delivered undamaged goods, and made good on anything that proved to be a problem. It is great to be able to inspect the goods before loading them on my truck.

JKJ

Re: The almighty Powermatic Not so...

#15

Try this approach.....

Roger Lance in GR, Michigan

>Dwain....its been a few years since I bought my major tools, but I know this would still work today...I went to a number of local business and showed them national ads and their prices and asked these local dealers to match these prices...a number of business owners became irate and in effect through me out of their stores, but I persisted and I found a local dealer who was willing to work with me...this might be true of you as well, I explained to that dealer that I would be buying a lot of tools over time starting with a Unisaw and if he was willing to deal on price I would be buying from him and him alone...he was not always able to meet national (Amazon) prices on each item but he made up for that on accessories to sweaten the deals as they came about over the years...eventually, I asked him if other customers haggled on price and he told me that its was extremely rare for a customer to do this...even for large construction companies that bought in quantity, no attempt at negotiating a better price (which amazes me as I was raised on the notion if you buy right, you can sell right)...try the local guys, I'm glad I did.

Re: The almighty Powermatic Not so...

#16

Re: The almighty Powermatic Not so...

Dave Anderson (PacNW)

>It's not the problems we encounter, but the way the problem was handled that will remain with us.

Dave Anderson (PacNW)

Re: The almighty Powermatic Not so...

#17

yabut,

Bruce, a MN Galoot

>your local good retail place is Acme, the original owners of Tool Crib that Amazon now owns.

bruce, who used to live 3 blocks from Acme Electric and still wishes he did...

Re: The almighty Powermatic Not so...

#18

Re: Try this approach.....

Scott in Montana

>Roger has a valid approach. But as a retailer let me put forth a few points that many customers don't know, or forget. First, the manufacturers don't give us one penny more profit than it takes to keep the lights on, pay the employees, pay insurance, and such. In most businesses only one to three dollars on every hundred dollars spent will make it to the bank after the overhead is paid. So it is easy to see that any discount we give has to be made up somewhere else. For a while manufacturers posted high suggested retail prices and then would have a suggested minimum resale price. It didn't take long before the suggested retail price was a joke and everyone only used the minimum price. Profit margins have never been lower.

Occasionally somebody will come in asking us to meet the price of an internet dealer of unknown ethics and suggest that selling the product to them at $20 above our cost is $20 we didn't have five minutes ago. This will always bite both of us in the butt! Something will always go wrong. If the product breaks the customer wants service that they didn't pay for and of course I don't want to offer service that the customer didn't pay for. The factory does not reimburse us for this service or even for the freight costs to send the product back for repair; this comes out of our profit. So I hope you can see what an ugly transaction this becomes.

The only thing worse is when somebody comes in with a broken product that they bought via e-mail and wants me to service it for them. Even if you offer to help them, most of the time the receipt or proof of purchase they have is not from an authorized dealer and consequentially they have zero warranty.

The bargains in this world are gone. You get exactly what you pay for.

Again, I have no intent to criticize anyone here, just hoping that people understand what they are asking for.

Scott in Montana

Re: The almighty Powermatic Not so...

#19

Re: Valid point...

Fred Davis

>The problem with accepting "cosmetic damage" is , it encourages less then acceptable behavior in the population.

Not holding manufacturers , shipping and handling people and your local fast food joint to acceptable standards degrades the standards we have all expected when we paid in full.

If we let food handlers slide, meat packers pay off inspectors with free steaks, congressionals elected to do a job give themselves pay raises and go on vacations without doing their job, then we really can't complain if the product we bought turned out to be a Lemon, dented, scratched or otherwise less then acceptable .

We have only ourselves to blame.

So I will continue to tell these people who have made slothful behavior a way of life , to do it over until they get it right, any house wife I ever did make overs on their home for would never hesitate to point out each and every tiny detail overlooked or sloppily done regardless of who was responsible.

But I digress.

FredD

Re: The almighty Powermatic Not so...

#20

Re: yabut,

Chuck in ND

>Don't feel bad Bruce, this summer Home Cheapo pulled out of this town, so no more local RIDGID dealers here now.

Re: The almighty Powermatic Not so...

#21

Re: Try this approach.....

Roger Lance in GR, Michigan

>Scott....I'll go on to try to clarify some other aspects of the arraignment I had/have with this local retailer...being in the business you know that Delta for example has various levels that it will charge for shipping to a retailer based on the size of the order, I was always willing to wait for my items while my retailer amased a sizable order to Delta so they got the best/most favorable pricing to them...and this sometime took months...but I was willing to be patient and to also be part of my retailers bank in effect...as mentioned before, my retailer was not always able to compete very closly on price at times so we would work on something that included accessories, power hand tools, sawblades, router bits, etc to make the deal a go and acceptable to both of us...also back in those days, Delta had frequent rebate programs on major tools and I would wait on that to make the deals work as well...and this retailer had some tools in his inventory that had been sitting for awhile...maybe years...and were now replaced by newer designs but were very good serviceable tools, I was happy to work out deals on these items also which worked for the retailer to get these things out of his inventory and worked for me as I was getting an industrial grade tool at reasonable cost...I'm sure its not easy being in business, but its not easy turning those hard earned dollars lose either...but there are ways to work together and its good to give the local businesses an opportunity to try to establish a mutually satisfying relationship.

Re: The almighty Powermatic Not so...

#22

I know this Woodcraft,

M. McNamee

>I stop in when I come to Knoxville to visit my son. Friendly folks and a well stocked store. I seem to leave with something everytime.

Re: The almighty Powermatic Not so...

#23

Re: Valid point...

Dwain

>Amen Paul, you took the words right out of my mouth, and I completely understand Mark's point about a sports car vs. an old truck, and with my situation being such that my saw is not used as a business tool...

I'm just a hobbyist with the good fortune to be able to afford one of the best saws on the market or so I thought. However, just because I may be a bit more fortunate than others doesn't mean that my money comes by any easier. Therefore, I would feel it hard to accept anything in the dollar value of a PM in less than what I would judge as prestine condition.

In my opinion making such a mistake would be the equivalent of knowing where all the flaws are in your finished project. It would eat at me for the rest of my life and everytime I would look at the saw I would be reminded of how I was foolish enough to accept it.

However, as you said. Once I have it in my possesion if I so choose to not take care of it. That's my right! but I will only accept it under conditions that are acceptable to me!

Thank you,

Dwain

Re: The almighty Powermatic Not so...

#24

Re: Valid point...

Dwain

>Amen, Amen, Amen Fred.

Those are words to live by.

THANK YOU.