Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

wood and stone furniture

Posts

wood and stone furniture

#1

wood and stone furniture

Clay Foster

>This is the second piece of completed for an art furniture gallery show. I guess it could be used as a table or bench.

The top is book matched pecan. The red stone is from New Mexico. The yellow stone is field stone from here in Denton County Texas.

35" long 20" wide 20" high


img

Re: wood and stone furniture

#2

Captured stone

Clay Foster

>There are two holes drilled through the stone and dowels holding the top together around the stone. I use carbon paper to get a close fit.


img

Re: wood and stone furniture

#3

fossils

Clay Foster

>The front of our house is stone veneer from these type of fossil rocks. We collected the stones, but had masons do the work.


img

Re: wood and stone furniture

#4

Re: wood and stone furniture

Dan Mitchell

>Great piece, Clay. How do you attach the stone to the wood?

Dan

Re: wood and stone furniture

#5

Not Props for a Geico Commercial!

George@Colonel's Workshop-Havertown PA

>Good Afternoon Clay,

There is grace and creativity in those objects, and they are also easy on the eyes.

George

Re: wood and stone furniture

#6

Age Estimate

Jim Shaver - Oakville, Ont

>As always Clay,

I love your sense of materials and design. As a point of interest ( I was a geologist in my other life) I looked at the fossils in the rock as best I can from your picture, I would place the age of the rock at that of the Ordovician about 480 million years old.

Hope that adds to your interest in the piece.

Take it easy,

Jim

Re: wood and stone furniture

#7

Re: wood and stone furniture

Clay Foster

>Thanks, Dan. Wood dowels and epoxy.

Re: wood and stone furniture

#8

Re: Not Props for a Geico Commercial!

Clay Foster

>Thanks, Colonel. I enjoy making them. It's a nice counterbalance to the exactness of the traditional furniture I make.

Re: wood and stone furniture

#9

Re: Age Estimate

Clay Foster

>Wow, that's older than the Colonel.

Re: wood and stone furniture

#10

Re: Age Estimate

Jim Shaver - Oakville, Ont

>:-)

Sure is....LOL.... also looking at the fossil record in this piece it looks like it was from a shallow marine environment.... still a geologist at heart, Oh I love Rocks!!

:-)

Thanks for allowing my indulgence

Take it Easy,

Jim

Re: wood and stone furniture

#11

using carbon paper

Tom Sontag - St. Louis

>That is very nice Clay. Strong yet simple designs are much harder to get right than most people think and as usuual you nailed it.

Tell us a little more about using carbon paper to get the close fit. Is it as simple as roughing out the void and pressing the stone against it with the carbon side against the wood to indicate where more matrerial should be removed?

Re: wood and stone furniture

#12

Old Growth, eh Jim?

George@Colonel's Workshop-Havertown PA

>

Re: wood and stone furniture

#13

Re: using carbon paper

Clay Foster

>Thanks, Tom.

It's pretty much that simple, just very tedious. It's important to be able to register the stone and wood back in the same position every time. A couple of dowels in the wood and stone will do that. I use a Dremel to grind away the black marks on the wood left by the carbon paper. Sometimes it only takes 40 or 50 fits, but usually more.

My only concern is how much longer I'll be able to obtain carbon paper. It's still available at Office Depot, although the little girl at the cash register with tattoos and safety pins on her face has no idea what it's for.

Witness marks is an old technique, but it's still used by machinists, gun makers, and dentists.

Re: wood and stone furniture

#14

Lee Gordon

Yabba Dabba Doo

Lee Gordon

>I actually think the piece is really cool. But it does give off a Flintstone-esque vibe.