Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

glass doors on cabinet

Posts

glass doors on cabinet

#1

glass doors on cabinet

Jack Schlachter

>Back to the corner cabinet again. What is the most acceptable or safe construction of framed glass cabinet doors for the bottom of the corner cabinet. I plan to make the frames square with mortise and tenon joints. Do you put the glass in grooves or rabbets with backing?

Obviously I'm a newby at this trying to learn how to make a nice piece.

Thanks,

Jack

Re: glass doors on cabinet

#2

Re: glass doors on cabinet *LINK*

galen V

>Why would they want glass in the lower cabinent of a corner unit. Do you mean upper cabinent where your eye can see whatever they intend to put in corner unit.

Cabinent I had glass had wooded strips just like putting in panels but they rattled in time so I converted to the little mirror type clips you can buy for same they have a button face to put pressure on glass that sets deeper into door frame. This was Merriet way to let you convert any door to glass in the 80s anyway.

I would go look at display models and see how the factory does it.


Leaded glass install

Re: glass doors on cabinet

#3

Oops

galen V

>You were talking a tall corner display cabinet and my brain was in base cabinets. Sorry

Re: glass doors on cabinet

#4

JL

Re: glass doors on cabinet

JL

>Thou shalt not put glass in grooves. Thou mayest have to replace it at a future time.

Seriously, I'd go for rabbets and backing. You can always take off a piece of molding to replace a piece of glass.

Re: glass doors on cabinet

#5

Re: glass doors on cabinet

Sawman

>Jack, If it is the lower part of the cabinet I would suggest that you use tempered glass.

Re: glass doors on cabinet

#6

Re: glass doors on cabinet

Jim Dillon

>Jack,

If you need to replace the glass sometime in the future, I vote for a rabbet of some sort. The simplist is just to cut the rabbet, then fashion a strip of wood fastened with brass escutcheon (Lee Valley)pins. The corners can be mitered or not. The strip of wood can be flush with the door's stiles and rails or slightly proud to give a reveal. Tapering the strip adds a nice touch. Of course, the enclosure strip can be more fancey depending o0n the style of the cabinet.

For something a little more complicated, using an offset mortise and tenon works nicely and generates the strip of wood automatically. Although more complicated to do, the strip of wood matches in color and grain to that of the stile or rail.

For a description of the first technique, see Glazing Cabinet Doors by Tony Konovaloff, "Essentials of Woodworking Series: Woodworking Techniques", Taunton Press, 2000. The offset mortise and tenon technique is described nicely in "In the Shaker Style", Taunton Press, Chris Becksvoort, Build a Bookcase with Doors. Also in FWW #128, pg 80, 1998. I used this approach for my kitchen cabinets and think it looks nice. Hope this helps.

As an aside, I've found both the paperbacks mentioned above to be very useful.

Jim

Re: glass doors on cabinet

#7

Re: glass doors on cabinet

Dave Bair, Eaton Rapids, MI

>For a row of upper kitchen cabinets, I used rabbets, held the glass in with a thin bead of clear silicone adhesive/chalk (DOW automotive) and then finished with thin strips of molding also siliconed directly to the glass. Appears to work well so far.

Re: glass doors on cabinet

#8

Thanks all for your suggestions.

Jack Schlachter

>