Moving the Powermatic 54A
Tomm
>Now that I have the new jointer I found that I would like to be able to move it around. Does it matter what kind of jointer mobile base I buy or should I stick with the base that Powermatic makes for this jointer?
Knowledge You Can Build On — Est. 1998
Moving the Powermatic 54A
Tomm
>Now that I have the new jointer I found that I would like to be able to move it around. Does it matter what kind of jointer mobile base I buy or should I stick with the base that Powermatic makes for this jointer?
Re: Moving the Powermatic 54A
JL
>It weighs what - maybe 330 lbs? Any quality mobile base should move it easily. How often are you going to move it, anyway?
I'd get the least expensive that can move the weight. I would lean more towards something from General, they've got one that will move 500 lbs. I'm sure the Powermatic base would work fine - but how much is it?
I've got a General International for my cabinet saw and a Rockler saw your own sides for my band saw. Both work nicely. The HTC would probably work also - but I don't have one, so I won't comment.
My #3 son has TWO HTC's
George@Colonel's Workshop-Havertown PA
>Good Afternoon Tomm,
My #3 son bought two HTC;'s from Amazon recently to accommodate his new(er)jointer and my old bandsaw. They work very well, and I wish I had bought them in lieu of the Shop Fox. I have had very good success with shop-made bases for my jointer, sanding center, and previous contractors saw. I have a Jet mobile base for my current Jet 14"bandsaw. That too works very well.
George
Re: My #3 son has TWO HTC's
Chuck in ND
>I'm a fan of the Delta 50-345 universal mobile base, infact I just bought a second one last week and cut the wood for it today. I have one on my JET 14 inch bandsaw and this second one will go on a Delta / Rockwell 9" Builders saw. What I like about the 50-345 is you can make them whatever size you need within reason and the single foot lever is nice. If I sell either piece of equipment I will keep the mobile base because I can resize it for another machine someday.
Re: Moving the Powermatic 54A *LINK*
Dan Mitchell
>I have my PM 8" 60A on one of these, made up w/1.5" oak. Said to be good to 600#'s. Works fine:
http://www.rockler.com/product.cfm?page=2383
I have all HTC bases. They're great!
David G. Sparks
>