Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Pen Morris Chair - Update-pic

Posts

Pen Morris Chair - Update-pic

#1

Pen Morris Chair - Update-pic

Jim Shaver - Oakville, Ont

>Hi,

Well this is an update on the Morris chair I am building, it is after an an example of a design that Chris Schwarz published in PWW in June of 2000. The original chair was made in the early 1900's by a craftsman man along the Ohio Valley. I have taken the design and enhanced it with details and features of my own vision.

The wood I am using is curly cherry, it all came from two boards. Last I posted the chair was basically all piece cut and roughly sized with the apron tenon and leg mortces completed. I now have updates from that last dry assembly.

Photobucket

I have been intrigued by Greene and Greene design now for a few years and I decided to add the elements I like such as cloud lifts and ebony accents to what was essentially an Arts and Crafts designed chair.

Photobucket

One of the features in the design that required a lot of drawing and scaling fro me was the front legs. The original has a very heavy look, and I wanted to lighten up the visual feel of the leg and chair with some details. I went for the A&C four equally spaced squares in the heaviest part of the front leg, it opens it up and is dimentional to the eye being able to see through the leg.

Photobucket

I also wanted to include ebony as a featre, so I laid out a pattern on the legs for 3/8" plugs.

Photobucket

Photobucket

I also wanted to find a way to add in ebony splines to the legs, so I routed out several in the front leg and one in the rear to add a detail I had not seen before elsewhere, I have a feeling it will work well.

Photobucket


border="0" alt="Photobucket">

Photobucket

Photobucket

I also added a detail on the aprons, to mirror the cloud lift along the edge I am hoping to find a way to inlay some 1/8" ebony.

Photobucket

All in all it's coming along fine, I am enjoying the proces of taking my drawn details to the work and even making some mock us to allow me to see in advance what I want and how to change it if needed. I am working on the arms now and side panels, trying to find the right visual design and balance that will bring this all together.

My favorite new shop jig is my smaller bench hook that I lock in with my leg vise, shooting tenons is simple and clean now.

Photobucket

I did glue up the chair back, you can see where there will be ebony plugs there on the back as well.

Photobucket

A lot more fine work yet to be done before I clean it all up, put on the finish and send it out for leather.

I'll keep you posted,

Photobucket

Take Care,

Jim

Re: Pen Morris Chair - Update-pic

#2

JL

Re: Pretty wood. This doesn't stress your hip?

JL

>I like the chair design. I'll have to consider doing one.

Re: Pen Morris Chair - Update-pic

#3

An heirloom, for sure!

Clint Searl, at the base of Haycock Mtn

>

Re: Pen Morris Chair - Update-pic

#4

Re: Pen Morris Chair - Update-pic

Susan Henderson

>Jim, I am excited to see the completed project...I expect it will be fantastic, as are all your other works... You have a gift! It was great meeting you at the gallery...Cheers!

Re: Pen Morris Chair - Update-pic

#5

Re: Pen Morris Chair - Update-pic

Jim Shaver - Oakville, Ont

>Hi Susan,

Thank You for your kind and gracious words. It was my pleasure meeting you as well!

:-)

Take care,

Jim