Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Grizzly Planer

Posts

Grizzly Planer

#1

Grizzly Planer

T P PETE

>I bought a 20" grizzly planer 17 months ago & have used it to plane about 10 boards. I might have 5 hours time on the machine & now the motor has gone out. I called the company & they said they could not help me because my waranty was out. I thought grizzly would stand behind their products, I bought an extra set of blades with my machine & I never dulled my first set. Am I crazy or should your motor go out, before your first set of blades? I am not happy, I bought this machine right before I had about 3000 bft. of lumber cut & waited a year to dry & now have no machine to plane down my lumber. Is there anyone else who has had this problem with Grizzly?

Re: Grizzly Planer

#2

What is the motor doing?

Dustmaker Mike

>you may just have a bad starting cap. A little more info maybe it is something simple we could help with.

Re: Grizzly Planer

#3

Re: What is the motor doing?

Pete LaBelle

>Was your wiring adequately sized to the motor? Undersized wiring will prematurely kill any motor.

Re: Grizzly Planer

#4

Call Again

Mike Fitterling

>I would try calling again and if they are still not helpful, ask for a supervisor. After all, if there is a one year warranty and you are past that a phone operator may not be able to do anything on his or her own authority. If you still get no results, you may want to visit Woodnet.net forums. I know the president of Grizzly posts there and is always very helpful. His screen name is PapaGriz.

I had a motor on a combo sander go out on me and as I recall I was past the warranty time, too, but they shipped me a new one poste haste, in spite of the heavy use to which I had put that machine. Been humming along nicely ever since.

Good luck,

Mike

Re: Grizzly Planer

#5

Re: What is the motor doing?

T P PETE

>The motor was working fine, then blew out the breaker.I replaced the breaker, & tried it again, it would start then pop the breaker. I called grizzly & went through everything to narrow it down to the motor, next I removed the motor & took it to a motor repair shop. They said the motor needed to be rewound & was probably a bad motor from the factory. I then called grizzly again,& they said my warrenty had exspired & they were not going to help me. Once again should a motor go out before your blades go dull?? I don't understand how any company would not stand by their products, that have less than 5 hours on them.

Re: Grizzly Planer

#6

Re: What is the motor doing?

T P PETE

>My wiring is the correct size, I even replaced the breaker to see if that was bad. I have a complete shop with 5 other 220 machines the only differance is they are all jet products & I have had no problems with any of them, don't get me wrong I think grizzly has good products. I did research this planer before I bought it, I just don't think I should have to buy or have to pay to have it rewound with 5 hours on my machine.

Re: Grizzly Planer

#7

Grizzly Planer

T.W.Constance

>I would certainly hope that they (grizzly),would work with you and solve your problem.Seems that it would behove them to do something for you.Grizzly does make a good product I think,and would be able to look at that motor's historical performance and note any premature falures.good luck .

Re: Grizzly Planer

#8

Re: Grizzly Planer

T P PETE

>I guess, the only question that I can ask my self, how I am going to plane done these 18" boards that I had sawed last year, when my planer is out of a motor. The wood has now dried out and is ready to be planed. When I bought this piece of machinery, I bought a pair of replacement blades, maybe I should have bought a replacement motor too. You know, I did my homework when I decided to buy from Grizzly and felt confident that their product would serve me for a number of years. As it is, I have only used this machine for maybe 5 hours. The machine shop I took it to said that the motor was bad from the factory, and I thought that at least Grizzly would offer to check it out for themsleves. But they just keep reminding me that the warrenty period is over and there's nothing they can do. This is really slowing me down in my projects and I do not have the funds to buy a new motor at this time. Any body know a supervisor at Grizzly that may listen to our concerns? Thanks, T P PETE

Re: Grizzly Planer

#9

Re: Grizzly Planer

Ron Knapp

>First I would try another motor repair shop. A couple of years ago I decided to have motor rebuilt on an old Delta Drill press. The first place I try had the motor for a couple of weeks and never seemed to get to it. I then tried another shop which did a fantastic job in a couple of days at a reasonable price.

I doubt of the Grizzly motor is worth repairing After you get done with the time and expense you still have a Grizzly motor(not there strongest point). Check with the motor people and see if you can get and good motor Baldor or equivalent. You will spend more money but at least you will have a decent motor that should last you several years.

If Grizzly decides to replace the motor you won't have to incur the expense but if they don't you can't throw a practically new planer away. Buy a good motor for it.

BTW It's not just Grizzy with cheap motors. I have a friend who bought a new Delta DJ20 jointer and it took 3 tries to get a motor that finally worked. If you saw the motors the use they are cheap Chinese one which I guess Delta figures are cheap enough to keep replacing. I have an older DJ20 which uses a US Marathon which has never had a problem and if you took saw the two you could not mistake the quality difference.

Good luck let us know how you make out.

Re: Grizzly Planer

#10

Re: Grizzly Planer

Fred Davis

>T P . I hate it when I read about manufactuers using a couldn't care less attitude towards a customer once the warranty has ran out and in many cases before.

A thought crossed my mind when I read your issue with them and one thing I have noticed over the years , is that a well executed complaint is kinda like a Pro football play book and generally gives the same results.

I wonder what would happen if you placed the planer on a flatbed truck , drove down to the nearest mall , hang a sign on the truck in big letters selling two minutes worth of beating the planer with a ten pound sledge hammer for five dollars, all of the time making it a video and then post it on You Tube. Just a thought , mind you . ;-))

FredD

Re: Grizzly Planer

#11

Re: Grizzly Planer

Barry Irby

>If it were mine, I would go over to Wood web and post a message to PappaGriz and explain the situation to him. Firmly, but politely. Then I would explain that this was about to become a hobby for me. I would plan on loading it into a truck and parking at the local Wood Craft, Home Depot, Lowes, Atlanta Tool Mart, Northern Tool, Mall, Sears, and any other place that sells tools with a sign on it explaining the situation. I might even print up some letters to Grizzly with pictures inside ready to go, and have passer's by sign them and I would mail them to Grizzly. They should be able to look at the machine and tell it has not been abused or used much. The value of making it right for you should be worth it just from the good press it would get them here At Wood Central alone. Your goal now should be to find someone at Grizzly that cares about their reputation.