Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

kitchen counter: wood/laminate interface

Posts

kitchen counter: wood/laminate interface

#1

kitchen counter: wood/laminate interface

les winter

>I posted below and got fine answers to the suitability of baltic birch for a kitchen counter laminate substrate. Thanks.

My next issue is that my better half would like to have the area around the sink be of plastic laminate, and the areas to each side butcher block. I'll keep the block 18" clear of the sink ends.

Other than just butting the block to the laminate/substrate sections, I am at a loss as to how to handle the interface.

Thanks in advance for any input.

Les

Re: kitchen counter: wood/laminate interface

#2

Re: kitchen counter: wood/laminate interface *LINK*

Kneale Brownson dreaming of snow in N. MI

>I'd be inclined to use an aluminum T molding


Something Like These

Re: kitchen counter: wood/laminate interface

#3

Re: kitchen counter: wood/laminate interface

John Cotten

>Make a maple end trim piece to block trim the end of the laminate counter top. I would make it 1/2" thick and the same thickness as your counter top and build-up on the edges. Glue with tight bond III and biscut joint the pieces together.

I would stay way from the T-molds they make the top look ugly and are a real pain to keep clean.

I would cut and drill 4 slots for bolts to pull the joint tight between the butcher block and the laminate top.

If you have any more questions, call me a 859-583-7881.

I make 3 to 6 counter tops a month.

John Cotten

Scribe Mark Woodworks

Re: kitchen counter: wood/laminate interface

#4

Re: kitchen counter: wood/laminate interface

les winter

>thanks gents.

regards

les