Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

course taking advice needed

Posts

course taking advice needed

#1

course taking advice needed

Bill Tindall, E.TN

>I will be taking a week long woodworking class next week in Jeff Headley's shop with a small class of 4 at a distant location(driving). Never done this kind of thing. For weeks I have been making a list of what to take.

What should I take other than the obvious tools? For example, I have remembered Windex and paper towels to keep glasses clean. What else have you all found useful?

Re: course taking advice needed

#2

Re: course taking advice needed

Jim Shaver - Oakville, Ont

>Hi,

Have fun in his class, sounds like a really great chance at learning from a master. I would include a note book for making drawings (grid paper) and notes, also< I always take my digital camera with me to record EVERYTHING!!

:-)

Take care,

Jim

Re: course taking advice needed

#3

Re: course taking advice needed

Jim in N. Va.

>Whenever I take a woodworking class, I like to take a lot of photos--of the prototype, instructor's demonstrations, and my work in progress so that I can have better recall after the class ends. Therefore, I would include a digital camera with a big memory card. I also pack poster board and drawing instruments to make patterns. Often, instructors are willing to share information from other pieces they have built and, if so, I ask to copy those items I am interested in.

Other than that, my advice is to take every tool in your shop. I've found that the one tool I needed is the one I didn't take. Although I have always gotten by with what I did have or by borrowing from others.

Have fun!

--Jim

Re: course taking advice needed

#4

Re: course taking advice needed

Jesse Cloud

>Don't know about this course, but some I have taken are lonnngggg days. Be sure to take good shoes, comfortable clothes, and maybe a bottle of advil.

Hope you will post about the class when you are done!

Re: course taking advice needed

#5

JL

Re: course taking advice needed

JL

>Other than tools?

Snacks (peanuts in shell, pretzels, whatever), beverages, a cooler.

Drawing implements (0.5 mm mechanical pencil, rulers, etc.), large poster board or large sheet paper. I've got a large (2' x 3') 1" quadruled pad that I take along with poster board.

Re: course taking advice needed

#6

Re: course taking advice needed

Thomas Skaggs, Foothills of Mount Level

>Maybe take your own safety items such as hearing protection, goggles (if you use them), gloves, dust mask etc.

Tom

Re: course taking advice needed

#7

Re: course taking advice needed

Hank Knight

>I've taken several courses in recent years, and the instructor has always sent me a list of tools to bring. I found that if I stick to the recommended list I'm usually good. If I take the kitchen sink, I end up lugging around a lot of stuff I don't need. I concur completely with the recommendation that you take comfortable shoes. You'll spend a LOT of time on your feet. I have a little different take on the camera. I always take mine, but I found that if I tried to photograph every detail, I spent more time fooling around with the camera than paying attention to the instructor and I missed some things. I use the camera to photogrpah unique jigs and such that I might want to refer to later, but I learn more if I leave the camera alone and watch and listen to the instructor.

Hank

Re: course taking advice needed

#8

Contact the School/Instructor

Mac in Indy

>They are in a better position to tell you what to bring than anyone of us. I'm sure it varies with the school. I've taught and taken a few courses and I take my layout tools, handplanes and chisels that I think I'll use during the project. The school where I have taught/taken courses provided snacks and meals and typically there were enough tools to go around the class in a share mode. But I have heard about others where it's not that way, so better ask before you go!

Mac

Re: course taking advice needed

#10

Re: course taking advice needed

Ed Mulligan, Cape Cod

>Notebook, pens, shop apron.

Re: course taking advice needed

#11

Re: course taking advice needed

Paul Leuba

>I have found it useful to keep a notebook nearby during these classes because some key information is often passed along verbally during the class that is helpful in future projects.

Paul in Hunt Valley, MD

Re: course taking advice needed

#12

Re: course taking advice needed

jan derr

>its not about what you should take, but what you shouldn't.

clear your mind.

Re: course taking advice needed

#13

Re: course taking advice needed

Fred Davis

>Bill,

judging from photos of your work and some treatise's you have written, one has to wonder what you need to learn in a woodworking class ? ;-))

FredD

Re: course taking advice needed

#14

Re: course taking advice needed

Doug Reynolds in Seattle

>The first year I went to Marc Adams school my wife and I drove (40-hours each way in late June from Seattle) so that I could take the necessary project wood and tools on the tool list. I usually keep my smaller hand tools in a knock-off of a Gerstner tool box I built a few years back. That way I had my normal assortment of layout, chisels, block planes, etc. in the same place I find them in my home workshop. Made the process so much more enjoyable. The last two times I flew to Indianapolis and took only what was on the tool list. I wished I had packed just a few more hand tools in both cases i.e., a combination square of all things. I just don't think you can take too many tools especially if you are driving.