Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

kitchen counter substrate

Posts

kitchen counter substrate

#1

kitchen counter substrate

les winter

>My kitchen cabinets are mostly installed and the counter top is my next issue. Because of a few unexpected issues, I'm running out of vertical clearance between the upper cabinets and the counter. I need to save 3/4" to allow appliances like the coffee maker to sit on the counter and slide under the upper cabinets. My plan is to use one layer of 3/4" baltic birch as a substrate beneath plastic laminate, with a hard wood edging. I won't be building up the counter with a second layer of 3/4" strips below.

Any problem with this plan?

thanks

Les

Re: kitchen counter substrate

#2

No problem

Ellils Walentine

>This is a common way to do it, Les. If you want the leading edge to appear thicker, put a drop edge on it. Just make sure you have enough headroom underneath to fit your dishwasher and any other fixed height appliances.

Ellis

Re: kitchen counter substrate

#3

Re: kitchen counter substrate

George Koch

>Les, As Ellis mentioned, you need 34 1/2" from finished floor to underside of counter for built in appliances, also most free standing appliances (ranges) are 36" to top of burner surfaces. George

Re: kitchen counter substrate

#4

Re: kitchen counter substrate

les winter

>Thanks Gents.

Just what I needed.

les

Re: kitchen counter substrate

#5

Re: kitchen counter substrate

Justin Szeliga

>Just a note about clearances. If the finished floor doesn't run under the cabinets, but butts to the front edge you may trap the dishwasher in place once the counter is in. Just make the screws easy to get at to be able to lift the counter if this is the case.

Peace

Justin

Re: kitchen counter substrate

#6

DAMHIKT

Ellils Walentine

>