Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Finishing face frames and carcass

Posts

Finishing face frames and carcass

#1

Finishing face frames and carcass

Bill H.

>I'm getting ready to finish some cabinets that I made w/ maple carcasses and cherry face frames. The carcasses will just be finished w/ a couple coats of polyurethane, whereas the face frames will be stained before sealing. Do you guys finish the face frames before attaching them to the carcass? Or are you just real careful? Will the stain hinder the glue from holding the two together?

Thanks in advance,

Bill

Re: Finishing face frames and carcass

#2

Re: Finishing face frames and carcass

Thomas Skaggs, Foothills of Mount Level

>I'm curious...why are you staining the cherry?

Tom

Re: Finishing face frames and carcass

#3

Oil Based Stain Will Hinder Glue

George@Colonel's Workshop-Havertown PA

>

Re: Finishing face frames and carcass

#4

Re: Finishing face frames and carcass

Bill H.

>I know, I know, it is a waste of good wood. My wife lets me use natural finishes on furniture, but she wanted the darker more HGTV look for the kitchen cabinets. She let me buy a bunch of router bits and a dovetail jig for the project so I'm not arguing.

Bill

Re: Finishing face frames and carcass

#5

Re: Finishing face frames and carcass

Vincent Booth

>For what it's worth, I suggest finishing the carcass before attaching the face frames. Mask the glue contact surfaces or sand of the finish after. Attach the face frames and touch up - scrape/sand excess glue and any other areas affected. Then mask off the areas not to be stained. A good painter's tape is worth the expense here, if you ask me. Just be sure to apply it well, fully press it down.

Hope this helps and if I'm off base here, someone please correct me.