Adirondack Chairs
Rick Jackson,TN
>Just finished two very comfortable chairs I worked on over the past few weekends it's been too hot to play golf. I used poplar and plugged all the screws, primered and used a couple of coats of exterior semi-gloss. Made from recent plans in FWW, I made a few changes mostly on the seat slates and cut the one closest to the back to follow the form of the curved back. The plan had a straight board going across. Enjoyeds building these and I took the time to make templates of the parts so the second chair went a lot quicker and I will have them to build more in the future. Thanks for looking. Rick



