Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

OT: Cutting Tin Roofing

Posts

OT: Cutting Tin Roofing

#1

OT: Cutting Tin Roofing

Ray Binnicker

>I have decided to put my air compressor and dust collector outside the shop. I am going to build a "lean to" off the side of the shop. I am going to cover it with tin roofing. I only have enough room for a 7' roof. The closest to 7' I can find is 8'. I don't mind having to cut the foot off, but what is the best way to do it?

Thanks

Ray Binnicker

Re: OT: Cutting Tin Roofing

#2

Re: OT: Cutting Tin Roofing

John E in SC

>Tin snips (or straight aviation snips - think that's what they're called) will probably make the cleanest cut, and it's not as hard as you might think. I've tried using a metal blade on a jigsaw or reciprocating saw, and for me at least, it made a jagged mess.

Re: OT: Cutting Tin Roofing

#3

Put an old blade on.............

Basil

>.... your circular saw "BACKWARDS". .....and sawing the tin from the backside seems to be easier (because you don't have to go up over the ridges, it's flatter) .

Re: OT: Cutting Tin Roofing

#4

Dale Lenz

Re: OT: Cutting Tin Roofing

Dale Lenz

>Don't know about the best way to cut tin roofing material, but I use a hand held angle grinder. Marked the lines and went to grinding, eye protection highly suggested.

Re: OT: Cutting Tin Roofing

#5

Re: OT: Cutting Tin Roofing

Eddie Pacheco: San Jose, Ca,

>I used a metal cutting blade on a Skilsaw (non abrasive type) to cut flat steel roofing and it worked well, surprisingly well. A lot of racket though. Any chance you can live with either a foot or 1/2 ft. either way of overhang?

Re: OT: Cutting Tin Roofing

#6

Forgot to mention, ......

Basil

>Look in your local paper for places that "make" tin. They roll it from flat stock and make exact lengths from very short to very long. The price is compareable to galvanized 5V farm tin from the borg.

Re: OT: Cutting Tin Roofing

#7

Use what the pros use......

Scott in Eastern Iowa

>.....a quicky saw.

You didnt mention if a rental tool was out of the budget, but this is what we use day in and day out in the field to install metal roofing and siding.

Chalk the line and cut it. Eye protection is mandatory I might add.

Re: OT: Cutting Tin Roofing

#8

Re: OT: Cutting Tin Roofing

Ray Binnicker

>Thanks for all the tips. This may not be as hard as I suspected.

P.S.

Basil,

I'm still using that red elm I got from you. That is some pretty, but very hard, stuff.

Thanks again.

Ray Binnicker

Re: OT: Cutting Tin Roofing

#9

Re: OT: Cutting Tin Roofing

mdclor

>Ray, I don't know where you live, but be careful if your compressor will be in an unheated space. Mine isn't recommended for operation below freezing.

Merle

Re: OT: Cutting Tin Roofing

#10

Re: OT: Cutting Tin Roofing

Ray Binnicker

>Thanks Merle,

I live in Central South Carolina. I had not thought about that. I do plan on putting some sort of sides on this structure but it certainly won't be heated.

Ray

Re: OT: Cutting Tin Roofing

#11

JL

Consider welding gloves if you have a lot to cut..

JL

>the sharp edges are REALLY sharp. Yes, I know, you'll be careful.

Re: OT: Cutting Tin Roofing

#13

Re: OT: Cutting Tin Roofing

Mike Fitterling

>An abrasive wheel on a circular saw for 5V and the like.


img

Re: OT: Cutting Tin Roofing

#14

Just cut some this way!

Tom MacGregor

>Fastest, cheapest, easiest way for me is the abrasive blade in a circular saw as above with goggles & regular utility gloves. I've tried just about every method known. The backwards wood blade is an earsplitting screamer that works in a pinch, but if you make the mistake of doing it with a carbide blade expect it to spit some sharp high-speed teeth.

Re: OT: Cutting Tin Roofing

#15

Re: OT: Cutting Tin Roofing

DizD

>You might want to consider Onduline roofing instead of tin - it's a corrugated asphalt sheet. I've used it several times and is very DIY friendly. Last I bought was from the blue borg.