Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Laguna Circle Master

Posts

Laguna Circle Master

#1

Laguna Circle Master

eliot d

>I have the Laguna 16 HD band saw and purchased the Circle Master jig. It's not made for my saw, and Laguna tells you that; but they claim that it can still work if you also get their table extension. So I got both. Now, here's the problem -- and you really have to have fooled around with it to follow all this: I mounted the table extension, according to the customer service guy's advice, on the right side of the table. This pretty much has to be the place for it in order to keep the jig from falling off the table while cutting a large radius log. But now this table position makes it impossible to use( one of the three) hold down handles that are supplied with the jig. Also, there is no place to use the other two hold down handles because the jig is too large for the HD 16 table. Also, there are two large bolt/nuts at each end of the jig bed that don't appear to have any function at all. Has anyone dealt with some or all of these problems? Help! (Incidentally, the Laguna people, who are really nice, seem to be in a confused state about it , too.)

Re: Laguna Circle Master

#2

Laguna customer service... oxymoron?

Scott in Montana

>You got to talk to the Laguna customer service people?! Wow! Don't get me wrong, I like their products, but nothing ever seems to fit as promised. When calling Laguna they assure me that their specialists will return my call promptly. Never happens.

Once I have fussed and modified the products to fit and operate correctly, I like them... but my experience has been that you are on your own after your credit card clears.

Good luck!

Scott

Re: Laguna Circle Master

#3

Re: Laguna customer service... oxymoron?

paul in AZ

>eliot, you call them "confused" and that is a very kind and gentle description of my experience with Laguna. Some years ago I ordered a bandsaw. Once ordered there was nobody to talk to other than an answering machine; they didn't return calls; had no clue on where the saw was or when it would get shipped. I finally gave up in frustration, cancelled the order and bought a Jet. No regrets.

Customer service from the Microsoft playbook.

Re: Laguna Circle Master

#4

Re: Laguna customer service... oxymoron?

Brent in Montreal

>My experience with their CS has been un-even. A few requests I made were answered quickly and fully. On the other hand getting my Driftmaster fence took a bit of doing. I finally had to ask to speak to the CS boss to get it done. Laguna doesn't always seem to know what fits what, but they appear to be working on it. The DM fence is a case in point. They recently came out with a pair of brackets that allow it to be used on just about any saw. On the other side of the coin, when I bought my LT18 I bought an extention table with it. Once I received it and realized it didn't work properly with my saw I phoned. They emailed me an internal sales memo stating that the table didn't fit all saws???? In their defense, they did give me a good price on the DM to make up for the mistake. Maybe all the bad press they've been getting on the forums has gotten them to open their eyes, even if it is one problem at the time.

Re: Laguna Circle Master

#5

Re: Laguna customer service... oxymoron? *LINK*

charlie belden

>When dealing with LT, you've got to realize that the stuff we can afford is still in the low end price range of their products line. Their primary income comes from shops that are buying production units - in the $25-$40K range. Only the "prosumer" (high end amateur consumer) make purchases that warrant decent to good service. They want to sell to people who know how to set up, tune and maintain machines. And frankly, many I Think I Wanna Be Like Nahm expect to get a machine that's Ready To Make Heirloom Furniture - out of the box - almost automatically - customers have expectations beyond their skills and abilities.

So, if you're not a "prosumer" or a big shop, you might look into other sources of help. LT does have a message board you can sign up for and get help from other owners/users. Yahoo has a Robland X-31 group of about 900 members - and many have other LT machines.

I bought the Robland X-31 Combi from LT - and had to go to Robland's factory - in Brugge - that's Belgium - and watch their guys set up 6 euro versions of the X-31, taking frantic notes and digital images and asking lots of questions. When I got home I put together a draft of the set up instructions, got help from other members of the Yahoo X31 group and we did our own manual. Since I already had a website I put that stuff up for others to use. Been revising and adding to it ever since, based on questions and problems/solutions others in the group have come up with.

American Woodworker did a DIY bandsaw table, table extension that can go off the back or off the side of the table, along with a fence that's easy to set to your blade's drift/lead.

Attached link should give you enough info to do your own version. If you put a T-Track in the extension table it shouldn't be hard to come up with a way to cut circles.


DIY BS Table, Fence & Extension Table

Re: Laguna Circle Master

#6

Re: count me out

North of the Border

>as a future consumer of any Laguna tools ... if their customer service has such a narrow base in mind. Even if I owned a Lexus car at the entry level price, I'd expect to receive the same kind of customer service owners of other Lexus vehicles received. If not, one can buy and choose the service of Acrua, Volvo, BMW, etc.

Re: Laguna Circle Master

#7

Re: Laguna customer service... oxymoron?

Larry Clinton At Frankfort (Central)., Indiana

>I am very glad I had researched the message boards before purchasing my last band saw. I went to several web sites and in almost every case I found comments regarding the lack,and poor quality of Laguna customer service. I know they must have spent far more money advertising and showing the "small" hobby market equipment at woodworking shows than they did on follow up service. From what I have heard they have done some improvement now. After the research and looking at the Laguna, MinMax and other saws at the WW shows.I purchased a MinMax MM16. I believe the quality of MM and Laguna are comparable - but the MinMax CS sold me. I certainly haven't been disappointed. Laguna really needs to take some lessons from Lee Valley - With great customer service their sales would probably triple.

Re: Laguna Circle Master

#8

Totally Agree With North

George@Colonel's Workshop-Havertown PA

>Good Evening Charlie,

Your first paragraph bothers me, Charlie. I realized a long time ago that the first rule of Marketing was to GET AND STAY CLOSE TO YOUR CUSTOMER. To think that I am not entitled to acceptable customer service because I don't have a professional/or production shop is ludicrous. I do expect any tool I buy to be very good right out of the box, and certainly within my ability to fine tune. Especially if it is a so called high end machine. The onus is on the supplier to make me happy, just as the onus was on me to come up with the bucks to buy it in the first place.

George

Re: Laguna Circle Master

#9

Re: Totally Agree With North

Fred Davis

>Amen George,

FredD

Re: Laguna Circle Master

#10

Re: Totally Agree With North

charlie belden

>I think part of LT's approach to customer service may be a cultural thing. Europe has a long history of training systems for "the trades". And that training infrastructure is available to the amateur woodworker as well. So they start with more knowledge, experience, or access to it close by, and different, perhaps more realistic, expectations.

Unless you buy an entirely new type of tool or machine - a CNC machine or a laser engraver/cutter for example - the assumption is that you've done your homework and know what's required to uncrate, set up, tune up and use a tool or machine, or have a friend/mentor who will provide the support we, in the USA, often just presume will be provided by the vendor.

The other thing to keep in mind is that LT sells mainly imported machines - from europe. Unlike imported cars and motorcycles, they're a single source, no nationwide dealer network to supply the customer support and service - and on the West Coast too boot. And since getting parts typically involves trans atlantic ship shipping, response times can't be very quick. The fact that most of western europe takes the month of August off for vacation may explain slow responses around that time.

As for the amount, quality and timeliness of service - we have a local car dealership that sells VW, Audi and Porsche. Whether it's fair or not, the reality is that the Porsche customer gets faster and better service than a VW customer when push comes to shove.

Sure wish ALL business where run by Lee Valley.