Need yet another dovetail gadget? *LINK*
Forrest Addy
>I thought this was cool.
Click here
Knowledge You Can Build On — Est. 1998
Need yet another dovetail gadget? *LINK*
Forrest Addy
>I thought this was cool.
Click here
Re: Need yet another dovetail gadget?
Robert R Clough - Thorncraft
>Hello Forrest. Hope you are ok.
That's a "neat" tool. I still like my JoinTech machine, though, or the jigs I have made.
Isn't that the same . . .
steve mackay
>saw rig we saw awhile ago ? With a new description ?
I dunno - I hate to be cynical
Howard In Toronto
>but aren't they answering a question noone asked?
there are lots of jigs, fixtures assists etc for whatever flavour of DTs you make.
seems like a lotta settings.
why bother using that fixture for the first saw lines.
Re: Need yet another dovetail gadget?
Rob Hix - King George, VA
>According to their web site, this thing is $1295.00. I could get a fully tricked out 24" Leigh jig and two dedicated routers for probably not much more than that.
Too much of a gimmick to me!!! Thank for sharing though.
Rob Hix
Re: Sorry to say that
North of the Border
>this is a jig that I wouldn't need or buy. I'd rather cut dovetail joints with a handsaw as the jig doesn't really save me much time in the set up and chiseling out etc. If it's true that this jig costs $1200+, I'm at a loss about the logic of this business venture as there's no way the inventor could break even with his investment.
Re: Sorry to say that
Fred Davis
>Bridge City Tools are not known for reasonable prices , this is a case in point.
FredD
Re: Need yet another dovetail gadget?
Tom Pilsbury (Chicago)
>I agree. It's cool. Completely unnecessary and way too expensive....But cool!
Re: Need yet another dovetail gadget?
Ralph Turney
>If it was only about 1,100 dollars less I would at least consider it for a minute before dismissing it. I do like the idea of a jig with out the router involved though, I'm getting to hate the noise and mess more and more. I also like the way it (appears to) makes very straight cuts, something I just cannot master yet.
Re: Consider cutting dovetail joints with
North of the Border
>a shop-made jig and a bandsaw. A recent issue of AW had an article on it was done that way.
Re: Consider cutting dovetail joints with
albertabob
>There are those that can enjoy and afford pure chocolate and those that enjoy a Crispy Crunch.
Most of the complaints about progress seem to come from the " Crispy Crunchers".
I often wonder what a lottery win might uncover.
Let's not be too hard on our inventors.
Cheers
Bob
Re: Need yet another dovetail gadget?
Charlie Self
>Lee Valley caarries Pax dovetail saws starting at $87. You can afford to wear out three or four of those learning how to cut straight lines--I'm not great dovetail master, but with the right saw, good layout, and a sharp chisel or two (all of which you seem to ened anyway with the Bridge City jig), the job is a whole lot easier.
Or you could use the Veritas saw and jig, which is way cheaper than the BCT jig.