Keeping Busy, (pic)
Jim Shaver - Oakville, Ont
>Hi Friends,
I�ve been keeping shop busy in these last few weeks working in the evenings and weekends on a nice design for a Morris Chair. I found the design in PWW after an article that Chris Schwarz wrote and completed.
I have chosen curly cherry for my wood and I milled it from two boards, one 5/4 and the other 8/4.
I recently put a Byrd Shelix in my General planer and I love the difference it makes in dimensioning wood, it�s expensive but the results are incredible.
A pile of wood becomes a project, I made several templates as well in this project so that I could also keep a �Story Stick� about how I built it.
The base build up is simple, basic M&T joinery, I mitred the tenons to fit in the legs. For me I like to get the basic concept created, all the square shapes and dimensions in control before I go after my design elements.
This past week I finally decided on the front leg profile, I changed it a few times from the original and settled on this look. I also cut a cloud lift into the lower aprons and also shaped the top of the rear legs for effect.
I see some shaping rasp work this weekend and some final base work before I lay out the arms and side panels. I have a vision of some G&G details making it into the work as well, so I am thinking some ebony here and there.
I will choose leather for the seat material as well after I am done with the woodwork.
Thanks for looking in.
Take care,
Jim










