Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Matte Finish for woodwork

Posts

Matte Finish for woodwork

#1

Matte Finish for woodwork

Jim Eddy

>I just finished rubbing out a houseful of woodwork for a VERY particular client. He didn't like the sheen left by the finishers, who used Formby's Low Gloss. I sanded with 320 grit Tri-M-Ite paper, then rubbed with steel wool. It improved the variation in sheen, but he'd like it better.

I'd rather not spray, since the masking problems would be immense. Is there a decent rubbing or brushing finish in a matte finish that anyone has used and/or can recommend? Given the volume of woodwork to cover, it needs to be a fairly easy finish to apply, and given the potential difficulties with the client, I'll need to be confident with it.

Re: Matte Finish for woodwork

#2

Jason Roehl in Lafayette, IN

Re: Matte Finish for woodwork *LINK*

Jason Roehl in Lafayette, IN

>Here's one I used once on the entire interior of a log home, but it's been long enough that I couldn't tell you much about it. I don't recall if I did any brushing with it, but we did spray many gallons of it.

Jason


Sikkens Cetol UV Interior Clear

Re: Matte Finish for woodwork

#3

Re: Matte Finish for woodwork *LINK*

pecker

>Homesteadfinishing.com carries a water borne, flat sheen Enduro brand polyurethane that can be brushed or wiped on. See link below, about halfway down the page.


http://www.homesteadfinishing.com/htdocs/generalfi