Hybrid Saw
Rick Jackson, TN
>Am I going to find a better choice than the Woodtek 10" left tilt hybrid table saw for $799? Everything I have read and learned says this is a good saw. Thanks
Knowledge You Can Build On — Est. 1998
Hybrid Saw
Rick Jackson, TN
>Am I going to find a better choice than the Woodtek 10" left tilt hybrid table saw for $799? Everything I have read and learned says this is a good saw. Thanks
Re: Hybrid Saw
George@Colonel's Workshop-Havertown PA
>Good Morning Rick,
I suggest you go to PopularWoodworking.com and see the video they have on testing hybrid saws. The Woodtec was not among the brands tested, but you may find attributes which you like in other brands. I bought a left tilt Jet hybrid, which replaced a perfectly fine Jet contractor's saw I used constantly for 10 years. I like the fact that there is no motor hanging out the back of the new saw. The fence is better, though not by much. Both saws had plenty of power. The jury is still out. I don't like the difficulty of making zero clearance inserts (blade clearance issue)with splitter on the new saw. I also was unpleasantly surprised that the relocation of the miter slots in my new table effectively diminishes the useful adjustment range of my Delta tenoning jig. Shop carefully.
George
Re: Hybrid Saw
Chuck in ND
>If your looking for a Hybrid, the best ones out there that I know of are the Steel City and the Craftsman, both made by Orion. They are the only Hybrids that I know of that have cabinet mounted trunions, the rest are table mounted. There are two Craftsman saws, the 22124 has the commercial Biesemeyer fence. I'm not sure about this, but if you join the Craftsman Club you may get a better deal.
Re: Hybrid Saw
JL
>I looked at and tested the Steel City Hybrids before I settled on a Steel City Cabinet saw. Redmond Machinery has the SC-35601 for ~$950 - but they also have the SC-35606 3 hp for $1050. I like Steel City. I have two pieces of Steel City equipment and I am pleased with both.
Re: Hybrid Saw
Dave Paine
>I have the Craftsman 22124 which is 1 3/4HP and has the Bies commerical fence. I have been using this for about 2+ years.
Whatever saw you get, replace with a decent blade. I happen to be using a Forrest WWII. Initially full kerf, but recently purchased a thin kerf.
I love the Bies commercial fence. It is very solid. It has cursor on left and right sides.
The only time I wished I had more Hp was cutting 8/4 maple. I recently found out Steel City has a 3HP version of their Orion hybrid.
I paid < $700 for this saw. It was before Xmas that year. Sale price and then Craftsman club special discount. Very good value for this price. I admit some aspects like the adjustment wheels appear to be more flimsy than desired, but overall, this is well constructed.
I am feeling the itch to get a 3HP saw, but in looking at the models, they do not have cursor or measuring tape on the left side of the blade, so if I get a replacement saw, I will likely want to use the Bies fence. Note this is based on a desire, and not disappointment with the present saw.
I purchased a zero clearance insert from LV. I am now making my own. Not very difficult. I like the LV insert, I just wanted to try out making my own. I wanted one with mini splitter installed, and one without for dadoes.