Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

I quit

Posts

I quit

#1

I quit

David M

>No more woodworking for me. With a condo in Florida and a townhouse in Indiana there is NO place for the tools. Sadly I am selling them all Saturday August 8. Delta lathe, mortiser, contractor's saw. 2 1/2 horse dust collector. 30 inch bandsaw. Lots more. All to the highest bidder....just like I used to be when I started out. It has been fun and a great hobby for me. It has also been great to see this site grow from a few hundred postings a week from people like Jon Arno and John Cotten to the status that it has now. Congratulations Ellis on a job well done. I will still be lurking here once in awhile.

Re: I quit

#2

Re: I quit

George@Colonel's Workshop-Havertown PA

>Good Evening David

And good luck. I don't know how you managed that decision. I would feel like running around aimlessly after chopping off my legs.

George

Re: I quit

#3

Re: I quit

Rod Peterson -- Ormond Beach

>Sorry to hear that. I went through the condo phase, myself, although I had all my hand and hand power tools there with me. Still, working on the lawn isn't the easiest prospect and I didn't do much.

Anyway, where is the sale, and what model Delta lathe?

Rod
So happy I learned that condo living isn't for me when I was in my 50s and could do something about it than in my 70s when I might not have been able to.

Re: I quit

#4

Re: I quit

galen V

>There is always room for tools. I did apartment living for 8 years and power tools in garage and car sat out in Iowa winters. If table saw blew the breaker 12 people could not get to their cars. Just read about a young man with a Jet mini lathe in his apartment closet. Dust? What dust! Never say never!

Re: I quit

#5

Re: I quit

Ralph Turney

>What a bummer.

Today I closed on a three bedroom condo with a two car garage and couldn't be happier. I'm leaving an apartment with a one car garage and will finally have room to actually make something bigger than a picture frame again.

There must be more to it than just a lack of space...woodworking must just have run it's course for you. I won't get rid of my tools, but it doesn't occupy my every waking hour like it used to, now it's more of a hobby than the obsession it was.

Good luck

Re: I quit

#6

Re: I quit

howard

>what about using hand tools? do you have a balcony or some common area that you could set up a small bench? personally,i can't imagine putting the tools down for good, I'd be looking for some way to create something. Just my opinion though

Re: I quit

#7

Don't quit....

Thomas Skaggs, Foothills of Mount Level

>....unless you really want to. There are plenty of ways you could continue to woodwork in a condo. Carving for one would be an option. And have you looked around for a community or group operated workshop? There may be resources in your area that you could use when you wanted to.

Selling your power tools doesn't have to be the end of the road!

Tom

Re: I quit

#8

Lee Grindinger

After 30 years as a professional furniture maker, *LINK*

Lee Grindinger

>This is my story about the process of liquidating a workshop and retiring, truly a bittersweet experience. Now, I've nothing but good memories. (And a small collection of hand tools)

Lee


"When it's Time to Move On" (Woodshop News)

Re: I quit

#9

Just so you know...

Michael Dresdner

>I built my first guitar on the kitchen table of my small, NYC apartment using only hand tools. Not all woodworking requires lots of space and lots of iron.

Re: I quit

#10

Too late.

Basil

>Since it sounds like you're having an auction, I guess it's to late to back out now. You could have thought out of the box a little, I mean really out of the box.

This is a small town and the rental rates for mini-storage units reflect that. Most units have a light and at least 1 or 2 110V outlets. I've seen folks doing worse than woodworking out of 12'X 20' mini-warehouse/storage units. I watched 2 guys build a race car out of a mini-storage unit nextdoor to a greasy spoon I used to eat at. They would roll it out, weld, work, etc. until late at night, roll it back in the unit and be back late the next afternoon to do it all over again.

With a few pieces of your woodworking equipment that you'd like to keep on wheels, you could have gotten by with maybe a small unit. Of course you would have to clean up out in front of your unit everytime you used it. I know it wouldn't have been ideal but........

Oh well. I hope you find something to enjoy in your new found free time. And be sure to come back and tell us about it. ....even rub it in a little if you get to having to much fun.

Basil

Re: I quit

#11

Re: I quit

David M

>The sale is Saturday August 9 at 9:30. Poser tools are to start selling at 11am. My address is 4393 W. State Road 56 Salem, IN. 812-883-6830 The delta lathe is 1642 with eletronic spped control. I really like the electronic speed. It make changing speeds quicker and easier.

Re: I quit

#12

Re: I quit

David M

>I am keeping carving tools and some chisels and a shop vac. I am tinking that when I need my woodworking fix, I can whittle away on a block of Poplar and make some shavings.

Re: I quit

#13

Re: Just so you know...

David M

>I certainly need to thank you for your advice over the years. You saved me from some disasters and made finishing easier for me several times. THANKS!

Re: I quit

#14

Re: I quit

Jim Dillon

>David,

If you get a chance, check out some of the workshop books by Taunton Press. IIRC, the one by Landis had a section on workshops set up in very small spaces like apartments etc. It is kinda amazing what one can do in a small space. Good luck in your new move and we hope to hear from you from time-to-time.

Jim