Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

On flattening water stones

Posts

On flattening water stones

#1

On flattening water stones

Ray Newman

>Colleagues: my water stones are getting worn & awhile ago I bought a ceramic "stone" to flatten the water stones.

However, I can not find the instructions!

Do you use it w/ a wet sharpening stone or a dry?

Or, do you soak the flattening stone??

This is the stone:

www.japanwoodworker.com/product.asp?s=JapanWoodworker&pf_id=01.090&dept_id=13122

Re: On flattening water stones

#2

JL

Re: On flattening water stones

JL

>I have a Norton Flattening Stone. I take my wet sharpening stone to a rinsed Norton Flattening Stone. I rinse both fairly often while flattening.

I also have a rough grid drawn on the water stone's surfaces (per Norton's instructions).

Before I got my Norton FS, I used a piece of 1/4" float glass and 80 grit silicon carbide powder. I'd put some powder down on the surface of the glass and "scrub" my wet stones on the powder.

Re: On flattening water stones

#3

search Hand Tool Archives

Bill Tindall, E.TN

>You will finddozens of discussions on this topic.