Re: I need a really aggressive drill Bit......
Fred Davis
>Electricians bits do fine as any electrician will tell.
Don't get carried away by thinking the bigger the hole the more wire you can pull though it.
Any building code subscribing to the NEC limits the number of cables that can go in one hole
3/4" to 7/8ths is about it for hole size.
The pro Electricians and Plumbers use a Milwaukee "Hole Hawg drill"
It is a two speed right angle monster that fits between studs, you can rent one if your buddy doesn't have one .
If you use the "Hole Hawg" by all means use the high speed setting , if you use the low speed which is also a low gear ratio , it will wind you up and break your wrists if you get into tough going.
Electricians bits are self fed "ship fitters bits" about 18 " long for overhead boring with a ladder.
Plumbers use a short Milwaukee "machine spur bit" that has teeth along the rim and replacement worm for the spur that you can buy in a slow , meduim or fast thread pitch. Go for the Electrician bit.
Spade bits while cheap and fast give a hole that screams amateur in it's roughness. The neater the installation looks also makes a inspector easy to get along with.
FredD