Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Taper Jig

Posts

Taper Jig

#1

Taper Jig

Mike Galloway

>If you enjoy making your own jigs check out this video that Charles Neil just put up on his web site at: http://www.antiquesbuiltdaily.com/tips.htm. The video is called: Taper Safely. In the video Charles shows you how to make and use the taper jig that he has designed. The jig consists of hold downs and cams that make tapering safe and repeatable. He also has a PDF file of the patterns you need to make the jig on his web site.

Re: Taper Jig

#2

Thanks Mike

George@Colonel's Workshop-Havertown PA

>Good Evening Mike,

Why izzit good info like that happens AFTER you needed it? I used my own home made Norm Abram tapering jig two nights ago to do legs for our new coffee table. I got ok results only because of good luck, great wealth, and exceedingly good looks. Well, maybe I dreamed that the results were OK. :<). I needed the hold-downs and better rigidity.

George

Re: Taper Jig

#3

Tapering on the jointer *LINK*

Dan Mitchell

>I find tapering on the jointer quick, precise & easy, with no special jig required, as demonstrated in this video:


Tapering on the jointer

Re: Taper Jig

#4

a jointer is easier

Bill Tindall, E.TN

>I find tapering on a jointer to be be potentially safer and more convenient-no jigs to make and use and the amount of taper is easy to control. One can even do reverse tapers where a leg starts large at the floor and tapers up to the rail and abruptly out to full size at the rail mortise.