Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Making an opening in ceramic tile???

Posts

Making an opening in ceramic tile???

#1

Making an opening in ceramic tile???

Thomas Skaggs, Foothills of Mount Level

>Some day I'll get around to doing the tile in the bathroom. I will be using big tiles...24" X 24" in size. In the shower I will probably need to cut an opening in the tile for the thermostatic valves. So I am looking for method suggestions. This isn't a hole that needs to be drilled. More like an opening that would be 3"X8" in the middle of the tile. Any suggestions?

Tom

Re: Making an opening in ceramic tile???

#2

Re: Making an opening in ceramic tile???

Howard Norman

>How about a diamond blade in a angle grinder? I have used one dry so they make a fair amount of dust but they cut pretty good.

Re: Making an opening in ceramic tile???

#3

Steven Antonucci

Lower it on a wet saw blade

steve antonucci

>I let my 10 year old son cut on a wet saw, so I think you'd be able to handle it :-)

Seriously, a plunge cut with the bottom side down to hide the saw kerf...

Re: Making an opening in ceramic tile???

#4

JL

Re: Do you have a Dremel? *LINK*

JL

>This little accessory might work. I've cut small pieces of tile with it.


Diamond wheel.

Re: Making an opening in ceramic tile???

#5

Re: Making an opening in ceramic tile???

Kevin Mac Luskie

>I just tiled 2 bathrooms, I used a 4 1/2" diamond blade (http://www.amazon.com/DeWalt-DW4701-Industrial-Cutting-Continuous/dp/B0000224X2) on my angle grinder for both the shower valve cut out, and the hole in the floor for the 3" PVC for the toilet.

I used very hard (PEI 5) Porcelain tile, you'll want a good dust mask, but it works really well.

Re: Making an opening in ceramic tile???

#7

Then I'd Have to Buy a New Tool....

Thomas Skaggs, Foothills of Mount Level

>....and that's good! ;-) I love it when the solution to a task requires a new tool. Oh sure, there are ways to do it without a new tool but where is the fun in that?

Tom

Re: Making an opening in ceramic tile???

#8

furthermore...

Bruce, a MN Galoot

>Oh sure, there are ways to do it without a new tool but where is the fun in that?

Furthermore, what would be the point if a job didn't require a new tool?

Bruce, looking for a new task.

Re: Making an opening in ceramic tile???

#9

Re: Making an opening in ceramic tile???

Jon Weisenbach

>Tom....

Most of the replies are spot on re: mini grinder and dry diamond wheel or a wet diamond blade on a table unit w/water for cooling. Now days most all the larger ceramic tile are monocaturra (sp) or single fired tile. Harder than the hinges of hell and really tough to cut with anything but diamond. Best advice is to make initial cut following a pattern drawn on the back side of the tile with a sharpie then finish corners on the face to square nice and clean due to radius of circular blade cut from the back side to your drawn marks.

Jon

Re: Making an opening in ceramic tile???

#10

Re: Making an opening in ceramic tile???

Andy Lincoln,in Dearborn,MI

>Tommy,

Just send that piece of tile up to me via USPS/FedEx,etc.

Layout precisely where you need the opening.frame the cut out in $100

bills and I'll blast the nicest square hole you have ever seen with the waterjet at the day job shop.48ksi and garnet do wonders to hard objects.And you can squarely look SWMBO in the eye and tell her you resisted the urge to purchase yet another tool,she should be proud!!

Andy

Re: Making an opening in ceramic tile???

#11

A different angle grinder approach

Michael Bush

>I made a hole for an electrical outlet in a 12x12 tile in a floor I laid for my parents.

I too did it with an angle grinder, but used a masonry cutting blade. This way it doesn't produce as much dust.

Re: Making an opening in ceramic tile???

#12

You need a Fein Multimaster

Glenn Madsen in the SF Bay Area

>I haven't read anyone else's post, but a tile job, especially one with BIG tiles, needs a Multimaster with the tile head attachment.

Good thing you can use it for lots of other stuff, too!

Re: Making an opening in ceramic tile???

#13

Jesper, Denmark

Re: Making an opening in ceramic tile???

Jesper, Denmark

>Hey Thomas,

Drill the four corners with a masonry bit and connect the holes using a jigsaw with a diamond blade.

The round corners will eliminate the stress risers from a sharp corner and reduce the risk of cracking the tile.

Re: Making an opening in ceramic tile???

#14

Re: Making an opening in ceramic tile???

Thomas Skaggs, Foothills of Mount Level

>Thanks Andy. I guess if throwing money at the problem becomes a good option I'll let you know! ;-)

Tom

Re: Making an opening in ceramic tile???

#15

Thanks Folks!

Thomas Skaggs, Foothills of Mount Level

>Thanks for all the suggestions...and excellent ones at that. Looks like I have some good options. I'll try to post pictures when the project is done.

T.

Re: Making an opening in ceramic tile???

#16

Re: Thanks Folks!

Glenn Madsen in the SF Bay Area

>If your project is at all like mine, and if you are at all like me, that 'getting to done' step may be 90 to 120 days.

Thank goodness for second bathrooms!