Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>28 July 2008

Good Morning,

This weekend was a hot one and yes, I know that we don't compare to the "dry heat" bunch out in AZ, but the heat combined with the humidity here makes it difficult. We've had to start getting up earlier and working outside while it's cool and then we don't venture out again until after supper time. Have I mentioned lately that I'm ready for Fall?

The day job has been keeping me busier than ever and family medical has kept the rest of my time "occupied". It will get better....in time.

During our local travels, I've been looking around for potential firewood. I haven't really came across much, but with what time I have, I really haven't had time to go and cut any either.

The LOML and my oldest son made it back from Alabama last night and it is GOOD to have everyone home. Well, I'm stopping here as it's time to go sit on the front porch with the LOML and drink a fresh cup of coffee!!!

So what did YOU do this weekend?

Best of weeks to you all!!!

Dennis

Re: WC Weekend Accomplishments.....

#2

Re: Mike's got a saw problem *LINK*

mike hamilton

>After expanding the saw arsenal with the purchase of a baker's dozen of the Disston and Atkins line. I again found a saw I 'had" to have. Something a little different, something for the dark side of my woodworking.

Yes daddy has a saw problem......

No clue how to expand the saw till.

Regards,

Mike


the latest purchase

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

Don at Central Illinois

>Turned a spalted hackberry bowl last week and tried to turn a small box out of the rest of the log. A little too punky so thought I'd try the 50/50 glue/water soak. I let is soak for a couple of hours and it is now drying out. I'll let ya'll know the results, hopefully, tonight.

Re: WC Weekend Accomplishments.....

#4

Final Clock Repair and Coffee Table Project

George@Colonel's Workshop-Havertown PA

>Happy Monday Dennis,

Charlie and I got together on Friday to complete clock repairs ffrom the accident. I have been forgiven. The bonnet is restored. The attached pic shows Charlie fitting a scarf jointed corner replacement to the bonnet S molding. Both sides required it. Fortunately each effort succeeded and the joints are tight.

Re: WC Weekend Accomplishments.....

#5

Part 2

George@Colonel's Workshop-Havertown PA

>I had an itchy finger on the "post" button! The pic shows the scarf joint and location pretty well. Following that exercise we mounted the real movement again and positioned the chime board so the individual chime hammers on the movement could strike properly and not interfere with the pendulum movement. That tool almost all day. Following that, we reattached the piston fitted back without my knocking the clock over on the floor again. Several beers each heralded that milestone. We loaded the bonnet in Charlie's car for final sanding and finish preparation at his home. Fabrication is now complete.

I accomplished much of the parts fabrication for out new oval drop leaf coffee table on Saturday and Sunday. My #4 son Gabe was home from Virginia to celebrate his 30th birthday. The other boys arranged space at a local Tavern for Saturday night, and the entire Family along with many of his local friends showed up=about 50 in all. They didn't get to sleep until nearly 0430 Sunday morning. The party continued after Church. Quite a weekend for us.

George


img

Re: WC Weekend Accomplishments.....

#6

Re: Mike's got a saw problem

George@Colonel's Workshop-Havertown PA

>Good Morning Mike,

I had to stihl myself for what was coming next. :<)

George

Re: WC Weekend Accomplishments.....

#7

Re: Mike's got a saw problem

Howard Norman

>Mike, at least you are in good company, there have been a hell of a lot of those saws sold and you don't hear many complaints about them. I happen to have a Husky of equivalent size myself but I am sure that I would be happy with a Stihl.

Re: WC Weekend Accomplishments.....

#8

Re: WC Weekend Accomplishments.....

Gary Camp, Bend, Oregon

>Trying to get my drainfield dug, hit a bit of rock, the down side of living in area with volcanic origins. I do have a rock hammer for the borrowed backhoe, that sure beats a jackhammer. I do believe that there are only two kinds of parts on a hoe, those that are already broken, and those that are about to break. Oh yeah, they parts that break only break on Sat. or Sunday, when the parts store is closed, lets see now how can I make this work with what I have on hand??? Built some fence, need to get the horses home. Hauled hay, I really only shoulda put 3 tons on the pickup and trailer not 4. Power is now hopefully only 3 weeks away, a place to poo maybe a week and a half. I sure do want to be living in MY house. Wood working? Well I made some stakes for the drainfield and I limbed some Junpier trees (I had to buy a new Stihl 361 a few weeks ago, dang a new tool) in the horse lot, can't really call it pasture if there is no grass now can I.

Did I mention that I really want to be living in MY house, I think as soon as the drainfield is functional I will be moving in power or not. Coleman lanterns, oil lamps and a generator for the shop tools, I can do it. Well hot water for showers is awfully nice.

glc

Re: WC Weekend Accomplishments.....

#9

Re: Mike's got a saw problem

mike hamilton

>Morning Colonel.

Though I didn't get a stihl of a deal, I was just happy SWMBO loosened up on the purse strings.

This move was prompted by a bunch of cherry turning stock I got (free!) that was too big for the bandsaw.

From my Dad I got the tendency to not own a lot, but not own junk. Nobody ever seems to complain about Stihl and I have a local dealer/servicer. I just needed a push......

The saw cuts like a charm. It will be while before I get as effortlessly accurate as that Grumbine guy though.

Regards,

Mike

Re: WC Weekend Accomplishments.....

#10

Re: WC Weekend Accomplishments.....

John Veerkamp, Western Mo.

>10 years after my first retirement I retired again. I have been working pt in a local farm & ranch store for the last 9 years. I turned 65 Friday and figured that almost 50 years of working, it was time to enjoy life a little more. So maybe I'll have a little more time for woodworking.

John

Re: WC Weekend Accomplishments.....

#11

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop-Havertown PA

>Good Evening John,

Enjoy retirement. I totally retired in 1999 and have been making furniture ever since. Retirtement isn't for everyone, but somebody has to do it. :<)

George

Re: WC Weekend Accomplishments.....

#12

Re: WC Weekend Accomplishments.....

Howard Norman

>John,you made the right decision. I retired in 1994 and have never regretted the decision. Enjoy retirement.

Re: WC Weekend Accomplishments.....

#13

Re: WC Weekend Accomplishments.....

Mac in Indy

>Well it's been a while but I finally did something in the shop. My college age son wanted a stand for his TV and stereo. Looking at the crap that he was thinking of buying I told him I thought we could build something quick (usually a problem for me!) and much less expensive (he was looking at ones that cost $150). Here is what I came up with for about $60 in materiels.


That's (4) 24 inch 5/8 threaded rods, (24) nuts/washers, and three pieces of 3/4 baltic birch (24x20 & 40x20). I sanded the Baltic birch to 220 grit and shot it with 3 coats of lacquer (in one day). I buffed the rods with a wire wheel on the bench grinder, but left the nuts and washers alone as they were clean and bright galvanized.


Shelf positioning is accomplished by nuts/washers above and below the plywood. I did heavily chamfer each hole top and bottom to keep the rods from delaminating the plywood right around each hole. Shelf spacing was determined by the way he wanted to place his components. I did however anticipate the speakers on the second shelf wings. That was one of the reasons the top shelf was only 24" wide.


About the only thing I'd do different is I'd make it a little shallower by a couple of inches, perhaps about 18" instead of 20". The 20" was chosen for stability but this thing is pleanty stable once you snug up the nuts/washers.

He is even talking about having me make some shelves in a similar design. Nice thing is when these go to the dorm in about a month they will knock down easily for transport.

Thanks for looking!

Mac