Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

One Old Drill Press

Posts

One Old Drill Press

#1

One Old Drill Press

Southern View

>Hi

I have obtained an old drill press recently and have also gained what feels like a new friend. I work at a golf corse in SW FLA. We have recently moved into a new shop and also purchased many new tools. One tool that was not going to be replaced and had a one way ticket to the dumpster was an old drill press. This drill press sat outside under a lean-to for more that twenty years and woould always work for whom ever dared to operate it. So I talked four other men to help me unbolt it from the ground and load it into the back of my Ranger. I drove all the way home from work looking up at the sky it felt like, this press has to weigh over 400 ponds, compressing my springs all the way in the rear of my truck. Dont ask how I managed to geet it out by myself when I got home, Im sure I'll be feeling it come tommorrow. Now at my house and safely in the garage I wiped off the smutt covering one of the metal labels on this press and all I can make out is Richards Badger-Package Wisconsin? So here I am wondering if I bit off a little more than I can chew, trying to refurbish this old dinosour? I know this may sound a little strange, but I feel as though I'm helping an old friend by doing so. Does anyone out there have any information on this press? Thanks for listening.

Re: One Old Drill Press

#2

Re: One Old Drill Press

Chuck in ND

>Pictures would be nice.

Re: One Old Drill Press

#3

Re: One Old Drill Press

Glenn Madsen in the SF Bay Area

>You may also consider a visit to OWWM.org. Lots of old iron folk hang out there...

Re: One Old Drill Press

#4

Re: One Old Drill Press

Pete LaBelle

>Pictures would help, but it you need a drill press, and it came home for free, it will still be a good exercise to tear it down, check out everything, clean & paint, & reassemble. Unless major parts are broke and you have some time, should be a good inexpensive project. Question becomes if you want to "restore" it to like new condition, or "recondition" it with a few modern conviences.

I restore old machinery/tractors/steam engines all the time. Tis lots of fun.

Re: One Old Drill Press

#5

Re: One Old Drill Press

Southern View

>Thanks Glenn

Re: One Old Drill Press

#6

Re: One Old Drill Press

Southern View

>Thanks Pete

I just finished doing a little work on it this evening. It runs well and all, just needs some major degreasing and some minor electrical work. I took the adjusting table off it and tried getting the gearing freed up inorder for it to move up and down, wow is there some interesting gearing inside this old guy. The table itself must weigh at least 80 90 lbs. I hope to find some information on this particular machine inorder to match up some paint if possible, maybe even an operators manuel? Well thanks for your insite Pete, hope to have some pictures soon.