Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Treating green wood disks...

Posts

Treating green wood disks...

#1

Treating green wood disks...

Rob Hix - King George, VA

>Hey all,

The family and I went to the Orange County, VA fair today, and the oldest kid and I cut off a disk from a log that the forestry service had there. They told me to take the disk home.

I know I cannot keep it from splitting, but I can minimized the damage. I am thinking of making a cut to the center of the disk that will help to relieve the stresses and minimize any other spliting.

Now, what can I soak the disk in so that the splitting will be minimized even further. Any help would be greatly appreciated.

Rob Hix

Re: Treating green wood disks...

#2

Re: PEG

Dave Mount

>Actually, you can keep the disc from splitting if you treat it with polyethylene glycol (PEG). You can google up information pretty easily.

Short of that, a single radial (i.e., bark to pith) relief cut may be enough to focus all the shrinkage on that point. In one of his books, Hoadly has a picture of a (I think it was oak) disk with a single relief cut and no other splits.

Best,

Dave

Re: Treating green wood disks...

#3

Re: Treating green wood disks...

Bill Tindall, E.TN

>The size of the disk, the wood species and how fast it dries (and probably the phase of the moon!) will affect whether it splits and how much. I have seen sections a foot in diameter not split, while I have a round of soft maple that I use for a demonstration that is only 4" in diameter and it has one nice big crack from drying.

Re: Treating green wood disks...

#4

Re: Treating green wood disks...

Rob Hix - King George, VA

>Bill,

The disk is probablt aboy 6-8" diameter and I am almost sure it is poplar. Any other hints. I really do not mind cutting the one slit from bark to pith. I think for what i have on hand right now that would probably be best.

I am thinking of drying it like I have seen hand-carved bowls dried. Soak it good with oil, put it in a plastic bag, and repeat the process daily tunring the bad inside out to let it dry. This seemed like an easy and straightforward process.

Thanks for the input,

Rob Hix

Re: Treating green wood disks...

#5

danger

Bill Tindall, E.TN

>If you put it in a bag it will mold and turn black. The bowl people have been having good success putting green blanks in ethanol and dehydrating the wood this way. It seems to not induce as much stress as air drying.