Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Organizing a new small shop

Posts

Organizing a new small shop

#1

Organizing a new small shop

Michael Bush

>I've just learned about this site from my old friend David Yoho, and told him I' show the flag. As it happens, I'm also puzzling over an issue there may be some wisdom here to help solve.

I'm nearly finished building a new shop for my hand tool heavy woodworking, and I've been re-thinking how to place everything. For years I've been putting storage and tool placement together randomly as I've needed it. The new shop seems like a good chance to approach organization more systematically.

I have a five-foot bench with both vices, a 14" band saw on a stand, a lathe that takes up about 5' x 2' of floor space, and just about every hand tool you can imagine, plus the usual miscellany of jigs, scraps of inlay material, patterns for various furniture parts, roughed out bowls, and so forth. You know...

So does anyone have good plans or successful experiments with shelving, cabinets, drop-down pieces, or other good ideas for organizing all this stuff?

Re: Organizing a new small shop

#2

no

Bill Tindall, E.TN

>So does anyone have good plans or successful experiments with shelving, cabinets, drop-down pieces, or other good ideas for organizing all this stuff?

Not me ..........I have shelving everywhere I don't have tools. And stuff is piled on the shelves. And I try to remember what is where. But I have never seen an organized shop that was busy making stuff.

A friend put pegboard around the wall on much of his shop. It seems like a good idea.

Re: Organizing a new small shop

#3

Re: Organizing a new small shop

Dan Donaldson

>Sounds like you are more hand tool oriented than power. You might want to also post this on the hand tool board. I wish that I could offer advice, but unfortunately, if you followed any of my example, you would probably never find half of your tools again ;-)

Welcome to Woodcentral. I think that this place is the best around and there is a lot of info and many friends here. Please look around and jump right in.

Re: Organizing a new small shop

#4

Dale Lenz

Re: Organizing a new small shop

Dale Lenz

>A good friend of mine offered the following advise as I was spending countless brain time with shop organization on paper. Dave's advise was: let the shop organize it's self. That is as you starting building, you will figure out what you use the most of and where handy thing needs to be. Worked for me. Have fun and you've got a good friend there, David Yahoo offers some good advice on this board.

Re: Organizing a new small shop

#5

Re: Organizing a new small shop

Michael Bush

>Letting the shop organize itself is what I've been doing for twenty-five years. (David and I started woodworking at about the same time.) No doubt that's what I'll do again, but I am "spending brain time" on it anyway. Probably pointless, as everyone is pointing out.

It's one of those things like cleaning up the attic that I have to spend some time thinking I could/should/ought to do better.

Re: Organizing a new small shop

#6

Resons why a (better) organzied shop is better

North of the Border

>Even if you enjoyed tools scattered around your shop (and I don't think you do, since you posted your question about organization), there're some good reasons why you may want to put away your tools in some organized maner:

1) you save time from trying to find the tool you need it, and believe me, 9 out 10 times you can't find it when you really need it, if your shop is disorganized or as we get older and older!.

2) you save $ (see (1) above) by not having to buy something that you know you have it somewhere.

3) There's less distraction and frustration and it'll improve your efficiency at the shop

4) If that's not enough, your family, visitors and neighbors would thank you (and secretly or openly) admire your efforts.

In addition to peg boards on the walls, I have one suggestion for you which I've immensely helpful: get some two-drawer or four drawer office cabinets (install wheel casters on them they don't have any) and you can put tools, catalogs, operator's manuals, reference articles or magazines, DVDs, etc. in them. They're generally dust-proof and their tops can also be used for storage boxes, etc.

Well, this is how I survive with a double garage that keeps its original purpose for parking cars at night while allowing me to do woodworking in daytime.

Re: Organizing a new small shop

#7

Re: Organizing a new small shop *LINK*

Dave Peebles Lyons, Ohio!

>Hi Michael,

Welcome, Here is a link to shoptours.org. You will probably find a ton of ideas there.

Best wishes,

Dave


Shop Tours

Re: Organizing a new small shop

#8

Re: Organizing a new small shop

Ralph Turney

>I now luckily have much the same problem as you...I'm buying a condo with a two car garage, so I'm moving from the one car garage (w/washer & dryer) to a two car and I'm so excited that I just can't hide it!!! I will park my truck in it at night (most of the time), but it still leaves plenty of room to leave the TS, BS, jointer and other stationary tools set up for immediate use. What I'm doing (I'm not sure that you can do this) is drawing it all in AutoCAD, and just like making paper cutouts, I'm moving things around to best see how it all works together. Unlike you, I'm mostly power tool heavy and AutoCAD may not be the best solution for you, but I does give me a better idea of the flow of things. I did the same thing with my present one car garage and it really did make a world of difference.

Good luck and enjoy your new "problem".

Ralph


img

Re: Organizing a new small shop

#9

A point to consider

North of the Border

>I see that in your autocad diagram, your plan is to park your truck with its front facing the garage entrance. I found out in my case, the exhaust fume stays in the garage for sometime before it's gone. Such problem rarely exists if I park my car with its exhaust pipe facing the driveway. I suspect this is partly the reason why most drivers don't back up into their garages.

Re: Organizing a new small shop

#10

Well, well - look who's here!!! *LINK*

David Yoho

>Hello, Michael. Glad you stopped in here. Here's a few random thoughts you might find useful.

First, as Dan already pointed out, a better place to ask this question might be next door over on the Hand Tools forum. Those folks eat, breath, and sleep hand tools and I'd imagine they would have wrestled with this problem themselves a few times.

Second, the first thing that comes to mind when hand tool organization and storage is mentioned is one of those cabinets I've seen made that has dedicated spaces for storing and hanging your tools. They usually have two doors that open away from each other revealing cubbies and storage for tools inside the doors and main cabinet. You've probably seen these before and, if needed, I can scrounge up a picture for you. They usually mount to a wall but I've seen some with legs too.

Third, you can always fire up that Mac and do a little CAD work as suggested already.

Knowing your passion for nice work and hand tools, I think you might enjoy a recent Shop Shot I did from Patrick Edwards. Check the link below and be prepared to be amazed!!

Good seeing you and the family after all these years. I'll be in touch soon.

David


Patrick Edwards Shop Shot

Re: Organizing a new small shop

#11

Addendum *LINK*

David Yoho

>Mike, I found a recent post I remembered over on the Hand Tools board posted by Dominic Greco of a hand tools cabinet he's been working on. There are pictures that will explain better than my words what I'm trying to convey.

Check the link below -

David


Dom's Hand Tool Cabinet

Re: Organizing a new small shop

#12

Re: A point to consider

Ralph Turney

>Yeah, I used to have to back my truck into my old house just like it shows in the dwg and it's never really been an issue with me, but that garage had a rear door leading into the house. The good thing about AutoCAD is that I can move the truck all around and I've thought that it might be better, space wise, to pull straight in anyway. I'm the last garage in a very short (100ft), dead end alley, so I can maneuver to my hearts content to get in and out, so I can chose either way.

Thanks,

Ralph

Re: Organizing a new small shop

#13

Re: Organizing a new small shop

Jim Dillon

>Michael,

First, welcome to WoodCentral. Any friend of David's is a friend of ours! If you can get to a decent bookstore, you might browse through Scott Landis's book "The Workshop Book", and Jim Tolpin's "The Toolbox Book". Both contain a lot of ideas and the proverbial dream shops. I think both books are available in paperback. I only can dream about some of the hand tool storage solutions - they are works of art with craftmanship far beyond my skill level. Hope this helps.

Jim

Re: Organizing a new small shop

#14

Re: Organizing a new small shop

Ed Mulligan, Cape Cod

>My most treasured woodworking hand tools are in a fine wooden chest but the rest - screwdrivers, pliers, wrenches, stones, hammers, mallets, drills, files, rasps and so on are in mechanics roll-around tool chests. They're not traditional but they work well and are relatively inexpensive

Ed

Re: Organizing a new small shop

#15

Re: Organizing a new small shop

George@Colonel's Workshop-Havertown PA

>Good Evening Michael,

First, thanks for posting your query. It gave me pause to review my own shop, and that includes looking at my Shop Tour, posted several years ago. There has been evolution--and its not too bad an idea to keep flexibility in mind as you procede with your own space. The suggestion that you look at the Shop Tours is spot on. You'll be able to glean all sorts of good ideas from an hour or two perusing that section. There have been at least two mentions of peg board. I preferred to make my walls of plywood, and I use wood cut outs and specialized racks to accommodate most of my hand tools. It makes them easier to find and put away. Plus, access is instant. Further, I don't have to contend with peg board hooks falling out as their holes elongate from wear. All my hand held power tools are kept in individual boxes I've built to set upon open shelves of my work tables. These protect the drills, sanders, etc from dust while permitting quick access. There are no tangled electrical cords. Its all neat and each power tool is self contained--sometimes with frequently used accessaies within the container. Drill indexes with the drills, sand paper/discs with the sanders. Blades with the jig saws, and collets with the routers. This is especially helpful if you want to work outside the shop in good weather. Grab one box and go. Its all there. As to arrangement, I have let the shop organize itself. Its a practical way of satisfying your own needs. Good luck.

George

Re: Organizing a new small shop

#16

Don't do it!

Barry Irby

>Every time I organize my shop and put everything back in its place, my son decides it would be a good time to start a project or whatever. With it all neat and organized he has no trouble finding whatever tool he needs and losing it. Attaching a tray to the drill press with it own array of drill bits was a terrible error. I cannot tell you how many bits have been lost because they were so accessible.

You will have family members and neighbors using your stuff. People who would have gone to Home Depot and bought something only to return it when the job is over will be using yours instead.

Use the memory system. Just throw the stuff in there in a giant jumble that only you understand. Its good to have a pile or two that looks like it might fall on you and kill you if it were touched. What is the Game where you stack the sticks and then pull one out one each turn until the stack collapses? (Jinga?) That's the way to stack your lumber.

Re: Organizing a new small shop

#17

Steven Antonucci

Everything is on wheels

steve antonucci

>In my shop (one car garage), I made sure that everything is on wheels. The ability to move something in and/or out of the way has immeasurable value. I store things that are infrequently used up high, and try to minimize clutter by have lots of drawers. Out of sight, and it's not cluttered.

If you own a lathe, consider hanging a shower curtain to contain the curlies. If I ever build a shop, I will put the lathe in it's own enclosed room.

Steven

Re: Organizing a new small shop

#18

Re: Don't do it!

John K Jordan

>Yikes, sounds like there is room for some discipline and tough love and a policy revision. I'll use my tools to help (nearly) anyone do their project but I learned the hard way to never lend anything with an edge or a motor.

JKJ

Re: Organizing a new small shop

#19

Re: Organizing a new small shop

Curly Smith

>I'd avoid the rolling cabinets and suggest that you take a look at the various "slat wall" modular storage systems (example, Gladiator Garageworks). There are many different systems, take a look and find one that suits your needs. Obviously you can also cover the walls with peg board, run cleats the length of the wall, and then build or buy cabinets to hang from the cleats. With a modular wall system you can move the pieces around to better suit your present/future needs and you preserve precious floor space by utilizing the walls for storage.

I've got rolling cabinets and shelves --- the flat top of the cabinets makes for good "storage", the shelves collect dust and I find that both are conducive to clutter.

Re: Organizing a new small shop

#20

Re: Dust issue

North of the Border

>"I've got rolling cabinets and shelves --- the flat top of the cabinets makes for good "storage", the shelves collect dust and I find that both are conducive to clutter."

The problem you mentioned is more a dust collection inadequacy issue than a con of using the rolling cabinets. Isn't it the case that this dust problem actually will get more pronounced with the shelfing system you suggested in the link which is an open system where dust can settle at will? In the case of cabinets, the items stored inside the drawers or cabinets are better protected from dust, assuming everything being equal.

Re: Organizing a new small shop

#21

Re: Don't do it!

Michael Bush

>That's pretty funny! Fortunately, my kids know not to be in my shop without me, but it's a good warning!

Re: Organizing a new small shop

#22

Re: Everything is on wheels

Michael Bush

>The shower curtain is a *great* idea! I'm going to do that.

Thanks!

Re: Organizing a new small shop

#23

Re: Organizing a new small shop

Ralph Turney

>Is it just me, or is that Gladiator Garageworks stuff insanely expensive?!?!

Re: Organizing a new small shop

#24

Re: Organizing a new small shop

Roger Lance in GR, Michigan

>Michael...welcome to the forum...it speaks well of you that you're friends with David who has been showing some very good work here of late of his own...congradulations on your new shop space...the two authors mentioned before have interesting books on shop organization (Tolpin and Landis)...lots of pictures and lots of ideas...you sound like an experienced woodworker so I won't assume that there is something that I could say that would be all that innovative to you...I would like to recommend that you do continue your efforts to organize your shop...contrary to some, I've always found a well organized clean shop to be inspirational and safer to work in...tools displayed on shelves, wall, etc are not only easier to find and use but are also great to look at...and a great shop atmosphere can make a guy want to do better work...best of luck to you and let us know how it goes.