Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Anyone have Veritas round router table baseplate?

Posts

Anyone have Veritas round router table baseplate?

#1

Anyone have Veritas round router table baseplate?

Dan Mitchell

>Looks like an interesting variation on the rectangular baseplate. I had been planning a shop made ~9x11 phenolic baseplate, but this may have some advantages & not too expensive.

One concern I have is the instructions seem to say you can only use the baseplate with 5/8 to 3/4" thick table tops; mine is 1 1/2".

Dan

Re: Anyone have Veritas round router table baseplate?

#2

Re: Anyone have Veritas round router table basepla

Mark Nowicki

>I have it and I am semi-happy with it. Step 4 in the installation process is hard if not impossible (at least for me) to accomplish with a fixed base router and not end up with slightly loose fit. I called LeeValley tech support, but got the impression that they never actually installed one. The answer I got was that "it should work" instead of "I don't know"

I would not worry about the thickness restriction. I suspect it is there to allow the router to " be inserted from below the table, a process so revolutionary we have a patent on it." I dropped mine from the top and it hasn't left the table since. I guess this makes me a counter-revolutionary.

Regards

Mark Nowicki

Re: Anyone have Veritas round router table baseplate?

#3

JL

Re: Anyone have Veritas round router table basepla

JL

>I have a lot of Veritas tools (spokeshaves, gauges, phi rulers, etc.) - but I don't have this one.

I like the thought of the magnetic holder/leveling system to hold the plate down while leveling it.

But why do you want this though? Why not a router lift which includes the plate? Just curious.

Re: Anyone have Veritas round router table baseplate?

#4

Re: Anyone have Veritas round router table basepla

Clint Searl, at the base of Haycock Mtn

>I put it in my table, which has a 1.5+" thick top. I don't remember the details of installation, but it worked out well. The top, BTW, is a double thickness sandwich of MDF, stuck together with fiberglass cloth and epoxy, covered with Formica. It's super flat and stable. A big Milwaukee hangs underneath. It's a neat design. The only thing I'm not happy with is the plastic insert, which gets eroded when pushing a heavy cut.

I also got their fence setup, which is less than great. It employs cam hold downs that don't hold down under little stress, requiring clamped on backups.

Overall, I give the setup a C+

Clint

Re: Anyone have Veritas round router table baseplate?

#5

Thought I'd included the link *LINK*

Dan Mitchell

>In case anyone wanted to see it.

The reason I'm looking at these, and also making my own out of phenolic rather than buying a fancy a router lift is simple. Money.


http://www.leevalley.com/wood/page.aspx?c=1&cat=1,

Re: Anyone have Veritas round router table baseplate?

#6

Re: Anyone have Veritas round router table basepla

Dan Mitchell

>"I guess this makes me a counter-revolutionary."

Too funny. I also love the way companies attempt to use the fact that something is patented to imply it's better. I used to work in patents at a pharmaceutical company. There are a number of strict criteria for being granted a patent, being a "good idea" is not one of them.

Dan

Re: Anyone have Veritas round router table baseplate?

#7

Re: Thought I'd included the link

BradH in PA

>Dan,

I sent you an email.

Brad