Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Black Lacquer Chess Table

Posts

Black Lacquer Chess Table

#1

Alan Young

Black Lacquer Chess Table

Alan Young

>I few weeks ago I posted pictures of a chess set and board I made for my fathers up coming 80th birthday. The set will be displayed on a table. The table is made from Poplar, brass, Maple and Walnut.Here are some pictures of the finished table and the chess set. The Chess set was turned from aluminum and coated with enamel.




The finish is oil paint, black lacquer and Mica gilding powder,



There are four maple and walnut disks in the middle of the table


Four Gilded maple spheres atop a series of brass disks and rectangles form the pediments that protrude through the table corners. They are boarder by maple and walnut half-disks...


The legs are have chamfered edges with a fluting detail down the middle. Brass rods served as stretches to join the legs which terminate in brass pads.




Thanks for looking,

Alan


Re: Black Lacquer Chess Table

#2

Re: Black Lacquer Chess Table

Marv....... Northern California Lake Co.

>Beautfull!!

Really nice job. Are the bases weighted? How did you do the Knights?

Marv

Re: Black Lacquer Chess Table

#3

Dale Lenz

Re: Black Lacquer ?

Dale Lenz

>Nice job on the chess set, Allen. I'm sure you're dad is Very Please! I know I would be if my son took that kinda time for me. ? about black lacquer. Did you just tint some lacquer with some universal black and shoot?

TIA,

Dale

Re: Black Lacquer Chess Table

#4

Alan Young

The knights

Alan Young

>Marv-

I hand carved or I should saw "filed" the nights after cutting out the general profile on a band saw. The are made from 3/8" thick aluminum. The aluminum responds well to small hand files.



The bases are cold rolled steel and as such provide more weight to the knights than the rest of the pieces. Years ago I made three similar sets totally from the steel-Those steel sets have more satisfiying weight.

Alan

Re: Black Lacquer Chess Table

#5

Re: Black Lacquer Chess Table

George@Colonel's Workshop-Havertown PA

>Good Evening Allan,

That is a truely complementary table and it gives proper justice to a magnificent board and chess pieces. The "look" is captivating. Geeze, a pawn would be real proud to be "pawn-promoted" on that battlefield. You do great work.

George

Re: Black Lacquer Chess Table

#6

Alan Young

Good ole Rust Oleum....

Alan Young

>Hi Dale,

I would have sprayed tinted lacquer but I had some troubling issues with my HVLP sprayer. So I hand painted the table with flat black enamel then top coated with Borg accessed Rust Oleum in the can...

Incidentally the bottom bead on the aprons is hand gilded with Mica Powders from Sepp.

Dad hasn't seen this yet. At least I hope he hasn't. His b-day is in October and I live 900 miles away. So this will be a special trip.

Alan

Re: Black Lacquer Chess Table

#7

Re: Black Lacquer Chess Table

Marv....... Northern California Lake Co.

>Allen,

You are giving me some ideas. I'm thinking of a more simple design using steel hex nuts and bolts for some of the pieces. I could use a garden hose brass spray nozzle for the queen. Not sure about the horse yet though.....

How many hour,s approx. do you have in it?

Marv

Re: Black Lacquer Chess Table

#8

Alan Young

Thank you George

Alan Young

>I sure would have like to have been at the 5 brans event. Maybe one of these years I'll get a chance to meet you and the PA crew...

I am still pulling for you and the Clock!

Alan

Re: Black Lacquer Chess Table

#9

Alan Young

Hours...Days Weeks Months...

Alan Young

>Marv,

I should be more careful in marking my time-But I just am not. So lets count the time this way. I turned the chess pieces about one a day over a couple weeks. Each horse head was fabricated in about 3-4 hours.

The board was made over the course of two weeks.

The frame work to the table was built in a couple of weekends but the corner pediments evolved over a period of four-five weeks as the rest of the piece took shape.....So over all ---I had nothing in early March(I think) and was finished in early to mid June.

Alan