Ooh, I can gloat a little
Stephen Kirk in Quakertown, PA
>Well, last Friday I suffered though, er, celebrated another birthday. I decided to run by my local Woodcraft (having taken the day off work) because I'd had a few thoughts about new tools. When I left, I just seemed to have a Steel City Mortiser and an Incra 1000se Miter Gauge in the car.
I set up the miter gauge first. It's a solid and accurate piece of equipment. Of course, the bar itself (even without the adjustment rings) was too tight for my old Sear table saw. A few minutes with Emery cloth took care of that. I love the toothed stops, telescoping fence and the cool toothed flip stop. I've made and used a couple of sleds in the past but they always go out of true or get dinged up and I just decided I wanted something that would always work well.
The mortiser took a bit longer and I still have a screw and some washers left. Steel City packs things beautifully, has a good manual and doesn't make assembly too much of an effort. I think the manual was a little older than the machine as some parts I was supposed to assemble were already done. I grabbed some scrap and gave it a whirl. I'm experiencing the "screaming chisel" phenomenon but I'll work on sharpening and adjusting to minize it. However, with very little effort I could set up the machine and start cutting mortises. For the kind of work I'm into, I think this is very quickly going to become a good friend of mine. Since I'm trying to do jobs for money I can see how this will quickly pay for itself. With a drill and chisel I could probably knock out a dozen mortises in and evening. Now, probably a dozen in 10-15 mins.
Now I gotta build another stand for the mortiser!



