Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Black ABS lid - how to enlarge hole for 4" hose? *LINK*

Posts

Black ABS lid - how to enlarge hole for 4" hose? *LINK*

#1

Black ABS lid - how to enlarge hole for 4" hose? *LINK*

North of the Border

>I have a cyclone lid from LV ( Lg. Black Cyclone Lid, 2-1/2" Hose Inlet 05J30.01). Is there a way to enlarge the hole's dia from 2.5" roughly to 4" for a 4" dia. hose? My dust collector accepts 4" hose and I wonder if I connect the DC to the cyclone via a 4" to 2.5" adaptor the suction force may be lost. The material is black ABS and I wonder if a router running on a circle template can do the job without cracking the hole. Or some kind of torch can be used to soften and distort the size of the hole. Any pastic experts out there who can help? Thanks.


LV cyclone lid

Re: Black ABS lid - how to enlarge hole for 4" hose? *LINK*

#2

Re: Black ABS lid - how to enlarge hole for 4" hos

Pete LaBelle

>Draw it out and use a Dremel.

On my lid, from another manufacturer, there were simply 2 holes to stick the hose into, thus creating a lot of leaks. Purchased a couple 4" hose couplings, screwed/shimmed/silcone caulked them into place, and it works well.

Re: Black ABS lid - how to enlarge hole for 4" hose? *LINK*

#3

Re: Dremel - what cutting tool should one ise?

North of the Border

>Thanks for your suggestions, especially the caulking idea. I was thinking of drilling small holes along a 4" circle and using the a jigsaw (with blade for cutting plastic) to cut the hole out. A Dremel may work to. What cutting tool should I use on a Dremel?