Fence Fretting....
Bill Tindall, E.TN
>One day, after a past spell of fence fretting on this forum, I thought maybe I should fret with my fence a bit (an old style Delta which I would not exchange for any other). It was well over 1/16" out of square. No telling how long it might have been this way as I had not checked it in 20 or more years. I hadn't noticed any adverse effect before, or improvement after, realigning.
I seldom use a ripped edge without further machining, for example smoothing with a hand plane or jointer. Which leads me to the conclusion that fence fretting is unwarranted , at least for my woodworking activities.
I prefer the old style Delta fence of one reason, it is narrow. The narrowness enables me to ride the fence in the vee between 1st and 2nd fingers with my thumb hooked over the back of the piece being ripped and 1st finger pushing down on it. With my hand thus captured on the fence it can't take an unintended trip toward the blade and the piece being ripped is under control. I have no trouble adjusting the width of cut to any accuracy I have ever needed.
On the other hand, I am not so casual about the miter and its adjustment.