Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Bocote? Why is there so little information?

Posts

Bocote? Why is there so little information?

#1

Bocote? Why is there so little information?

Scott in Montana

>Hello all,

I recently ran across a batch of very figured 4/4 Bocote wood and bought it. 30 board feet, four foot lengths, 4"-8" widths. Impulse purchase, I know. Anyhow an internet search turned up very little on this wood. Does it have another name? I find pool cues and pens are common uses, so it must turn well. But does anyone out there have more information on tooling this beautiful wood. Projects you've seen?

Thanks,

Scott

Re: Bocote? Why is there so little information?

#2

Re: Bocote? Why is there so little information?

John K Jordan

>>...another name?

As usual, there is much room for name confusion with tropical woods, depending on where you are and who is selling. From my reference books:

Bocote

Family: Boraginaceae

Scientific name: cordia spp.

(cordia allidora, elaeagnoides, docecandra, gerascanthus, et al)

Some common names:

Amapa

Anacahuite

Baria

Bocote

Bois de rose

Canalete

Canaletta

Cordia

Cordia, Light American

Cupane

Cyp

Cype

Ecuador laurel

Laurel

Laurel de costa

Laurel negro

Lauro negro

Lauro pardo

Louro

Peterebi

Princewood

Salmwood

Solera

Siricote

Zircote

Re: Bocote? Why is there so little information?

#3

Bart Goldberg

Re: Bocote? Why is there so little information?

Bart Goldberg

>I can't tell you any more about this wood other than I grabbed a really nicely figured board the last time I was at my wood supplier. It is a beautiful species of wood. It almost looks fake its so pretty. I have yet to decide what to make from this board.

Bart

Re: Bocote? Why is there so little information?

#4

Why is there so little information? Must be

Mark Goodall - ATL - tooljunkie

>"...Bocote? Why is there so little information?..."

Must be because..... (get ready)..... there must have been a boycott on that species ;)

Sorry, couldn't resist... (but I bet you wish I had)

Happy Woodworking!

Re: Bocote? Why is there so little information?

#5

Better than poisonous or a carcinogen! :O)

Scott in Montana

>

Re: Bocote? Why is there so little information?

#6

Re: Bocote? Why is there so little information?

Brent in Montreal

>I've worked a bit with Bocote making boxes and small cabinets. It machines well with sharp blades. Though it looks oily it sands well and glues up easily. It works very well with handtools and doesn't splinter or crush.

It's drawbacks, IMO, are few. Because of it's wild grain it tends to curl when resawed. I've also found that most pieces offered at retailers aren't completely dried, so better to buy it and wait a bit before using it. Another problem, if you can call it that is the grain. Because the grain in most pieces is so wild, and the narrowness of the pieces, it can be hard to select pieces to go together in larger projects. I have come across a few pieces that were quarter sawn (more by accident than design I think), they had some beautiful ray fleck going on.

I've never experienced any negative physical reaction to this wood.

Re: Bocote? Why is there so little information?

#7

Re: Bocote? Why is there so little information?

Glenn Madsen in the SF Bay Area

>I did the same four or five years ago. It still sits in my wood rack, unworked, but giving me pleasure whenever I go through the pile.

Someday.