Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Treasure find

Posts

Treasure find

#1

Treasure find

North of the Border

>A woodworking hobbyist I stumbled upon told me he got his lumber cut-offs from a shop that custom makes hardwood door and hardwood flooring. On my way to work this morning (around 8:30am), I dropped by that place first and filled my car with several bundles of walnut. In the the pic, the shorter bundles were $3 each and $10 for the long ones (3 feet long x 4" and 3/4"). The cherry is $8 and the two white oak with very nice rays for $8 (the picture doesn't do the justice). All taken $45. I believe that's about 30% - 35% of what I'd have had to pay at a regular lumber store. You may probably find similar deals in your local area if you can find shops that custom-make doors, etc.


img

Re: Treasure find

#2

Re: Treasure find

Ray Binnicker

>That is a great find !!! You don't come across deals like that every day.

Ray Binnicker

Re: Treasure find

#3

Re: Treasure find

North of the Border

>I only took about 1/10 of what was there in the cut-offs section. And I only took some walnut, cherry and white oak. There're still tons of walnut, oak (red, w, qs), mahagony, plus many other wood species, some of which I don't recognize. I'd need a truck if I wanted to load them all (and a storage to keep them!). That woodworking buddy also gave me another location to check out (which I may do tomorrow) and according to him, the prices there (not cut-offs) could be even cheaper. I hope he's right and I may pick up some boards for a side chair I plan to do. I always find lumber a bit pricey at the retail stores and hope these will be my new sources of wood. As I said, your yellowpages may help you find similar sources in your location. Good luck.

Re: Treasure find

#4

Re: Sources such as these are crucial

Glenn Madsen in the SF Bay Area

>They let you start thinking creatively about what you want to build, rather than going shopping for ingredients that might be available.

That, and it frees the budget for occasional special pieces of wood that just need to follow you home. Even if you don't have a current project for them.

Re: Treasure find

#5

Re: Another place to look

Larry Clinton At Frankfort (Central)., Indiana

>is the estate auctions in the countryside. At least here in Central Indiana. I have my room above my shop (30' long - 8' wide X 8' high with knee walls) filled to capacity with rough sawn hardwoods - actual cost less than .50 bf - They include Walnut, Cherry, White Oak, Locust, Poplar, Ash etc.. Most came from the Amish community. It seems like just about every family keeps lumber for personal use. One Auction about 2 years ago was for a gentleman that passed away leaving a full 40' long sawmill (driven by the motor/front section of a Case tractor). He had one building about 200' X 60' (former turkey raising building) and 2 fairly large barns - filled with air dried hardwood. The auctioneers told me they had 2 skid loaders working for an entire day to move enough wood from the buildings and stack it on the lawn so they could see all the wood to sell it. I purchased 3 loads for my trailer (it is about 10' X 5' inside the sideboards). I didn't realize I had so much till we started loading - I'm sure I had at least 2,000 lbs in each load, possibly 3000 in one. One purchase was a stack of figured Cherry, plain sawn 8'+ long X 6/7' high X 4' wide. Some of the boards are about 2 foot wide, all were in 8'+ lengths sawn about 1" thick. I believe this was all from one tree. My total expenditure for the day was $160.