ebonizing
McKay
>I have ebonized before, but I can not remember how long steel wool and vinegar must steep before you can ebonize wood. Does anyone know? Thanks in advance.
Knowledge You Can Build On — Est. 1998
ebonizing
McKay
>I have ebonized before, but I can not remember how long steel wool and vinegar must steep before you can ebonize wood. Does anyone know? Thanks in advance.
Re: ebonizing
Alex Grigoriev
>Depends on steel wool number. Use the finest. You may also want to wash it in a solvent, to remove any protective oil, and tear it to small pieces.
According to my calculations, you need about 2.5 g of iron per 100 g of 5% distilled vinegar. When it's fully dissolved, almost all acetic acid reacted, no more iron will react.
Re: ebonizing
John McGaw
>I've always found it easier and more reliable to use leather dye. The chemical reaction involved in the steel wool/vinegar solution seems to be far too dependent upon the amount of tannin in the wood and I've never gotten really good black -- even freshly cut red oak never seemed to get more than dark brown for me. Black leather dye really does give the black seen in Gabon ebony.
How about...
Clint Searl, at the base of Haycock Mtn
>lamp black pigment paste, Ronin brand. Can't get much blacker than that. Just thin as much as you want with naptha, rub it in, and finish with anything.
Clint
Re: ebonizing
Craig in Silverdale
>I've had good results with India Ink before. Not expensive and readily available at art supply stores. Good luck and have fun.
Re: ebonizing
Fred Davis
>I used Omega leather dye for years on leather , then wood and found out from a leather worker guy by the name of Al Stolhman that if you dyed it dark blue first , then the Black was a true Black without any of the purplish undertones in it.
FredD