Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

So I'm stuck in the 19th Century ....

Posts

So I'm stuck in the 19th Century ....

#1

Alan Young

So I'm stuck in the 19th Century ....

Alan Young

>but needing a 21st century writing desk drawer....

This desk will have one drawer which should pull out, then the front should fold down for access to the keyboard or a laptop. But it would seem counter intuitive to keep the laptop in the drawer while using it...else what is the rest of the desk for???? I think the screen should be at the desk top height...Are laptop computers ever run off of a separate key board?

So what I am really looking for I guess is hardware that allows the drawer front to fold down. But I want it solid when you pull the drawer out-In case the drawer is not used to house a keyboard. Ideally, the drop down hardware has to operate after the drawer is pulled out...anything like that out there?

Alan

Re: So I'm stuck in the 19th Century ....

#2

Re: So I'm stuck in the 19th Century…

Rod Peterson -- Ormond Beach

>> Are laptop computers ever run off of a separate key board?

Absolutely. I do that all the time. In fact I carry a keyboard and a trackball in the case along with the laptop because I can't stand using the built in keyboard or touch pad. Both are USB devices, which mate nicely with the laptop USB ports on the side.

Rod

Re: So I'm stuck in the 19th Century ....

#3

Maybe a False Drawer? *LINK*

Thomas Skaggs, Foothills of Mount Level

>One idea might be to make the drawer front false. Put hinges on the bottom edge so it hinges open. Then use a slide out laptop tray (link attached) to slide out, rather than a drawer.

Tom


Laptop Tray

Re: So I'm stuck in the 19th Century ....

#4

Avoid technology

Mark Goodall - ATL - tooljunkie

>I would avoid building heirloom quality furniture (that will last 100 years) to specifically fit technology that may be obsolete in 5 years.

Design it and make it work for today, for sure, but don't don't go overboard which may make it difficult to use in a few years.

Laptop computers can use a docking station to make it easier to connect/disconect daily. They can also be used with USB wired or wireless keyboards and mice, and other devices like a monitor.

It's hard to predict what sort of computer device you will use in 5 or more years. Laptops with flip-up screens may be replaced with notepad type computers. Screens may be replaced with projected or hollographic displays. Or have you seen the new computers that use a large glass coffee-table top for the screen and input device? I have a computer hooked up to my large screen LCD TV and sit on the couch to do some computer work that I used to do sitting at a desk :)

I've seen lots of furniture built in the days when desktop comptuers were physically huge. And in the days when we used those huge CRT tube-type monitors that take up so much space. They look kinda silly now with a desktop computer than is 1/3 the size and using a LCD monitor. And how about those desks that had specially sized shelves for floppy diskettes or CD/DVDs. All of which have or are becoming obsolete ;)

So I would think in terms of furniture that is adapable rather than specific for a technology that may be gone in a few years. Just my opinion, of course :)

Happy Woodworking!

Re: So I'm stuck in the 19th Century ....

#5

Re: So I'm stuck in the 19th Century .... *LINK*

Sue McLam in Orange, VT

>Alan,

I recently built a desk with a drawer face just like you're describing. I used the H-64 hinge from Horton Brass. One thing that I really like about it is when you close the face the hinges snap closed too so you don't need any kind of ball catch to hold the face closed.

Sue


http://www.horton-brasses.com/products/seenin/newyankee/45

Re: So I'm stuck in the 19th Century ....

#6

Alan Young

Some very helpful suggestions here...

Alan Young

>Thanks for the replies friends, Some good options to pursue.

I need to give the overall function a bit more thought...

Alan

Re: So I'm stuck in the 19th Century ....

#7

Re: So I'm stuck in the 19th Century ....

Jay St. Peter - SoMD

>Two things. First, I use a wireless KB and mouse and sometimes a separate display for my laptop (both as primary display and as a dual display depending on what I'm doing). It is just more pleasant to use when you're working for long periods than the cramped laptop.

Second, I have a keyboard drawer on my expensive store bought desk that functions as you describe. Pull it out and flip the front down. I can't stand it. The drawer thing liked to move around slightly even though there was a locking mechanism on it. I also wanted a slightly different angle of attack than I could achieve with the drawer and the silly flip down front in the way. I completely removed the drawer and all the hardware to give my legs more room. My expensive computer desk is basically a table now since I removed the printer holder that didn't hold my new printer also.

I'm with Mark on this one. Go to the store and get yourself a knockdown melamine cheap computer desk that fits your stuff now and gives you the ergonomics you desire. Then you can chuck it when the next new printer/scanner/computer shape comes along that doesn't fit.

Jay

Re: So I'm stuck in the 19th Century ....

#8

Think you, again, good sir!

Joanne Adler in Pt. Pleasant, PA

>Of your original intent and purpose in the creative endeavor of this fine desk. Is it not but for the written word? Mr. Darcy would say "Fie!" on your lofty plans of modernization. Further would he beg you to reconsider and urge you to get you a well of ink as black as his beloved Elizabeth's hair and a quill of as fine a feather as any found on Pemberley's exquisite grounds. Procure a linen paper of excellent quality and add a leather top on which to write and blot. There you have it! Now, that is a desk fit for gilding!

;-)

Re: So I'm stuck in the 19th Century ....

#9

Alan Young

Holy polluted shades of Pemberley...

Alan Young

>You have saved me from a most imprudent design decision. Yes of course this must remain a drawer in the most traditional sense. In fact now that I think about it, I better remove all the black drywall screws too!

Now about the leather for the top- hummm I hadn't figured ol' Bessy in the budget for this piece....

Alan