Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Pair of cabinets

Posts

Pair of cabinets

#1

Pair of cabinets

Thomas S Stockton

>HI all,

Some of you may remember the post I did about a pie pattern top that had moved before I had time to veneer it down, here are the finished cabinets. They are curly maple veneer and a solid maple border around the top. The client approached a gallery I show in about building something similar to a picture see had from a design catalog. The cabinets were elliptical but were rather plain and were not as nice as they could be.

My job was to take the basic idea and make a pair of cabinets that were much nicer and much better built. Each cabinet has a door and slide out writing surface on touch latches. The gaps around the door were left wider than usual as a homage to the originals which were monstrous and fairly ugly, it also gives it a more sleek look and accents the door.

The tops are a 12 way pie match, that turned out really nice, it was originally speced out as an 8 way, but you get a nicer look and more visual movement with a 12 way.

Tom


img

Re: Pair of cabinets

#4

WOW!!

doug f, san clemente, ca

>I haven't seen that level of craftsmanship in a long, long time and I look at a lot of cabinetry.

I'd love to see some shots of the inside and details of hinges, latches, etc.

Outstanding work.

Doug

Re: Pair of cabinets

#5

Holy Moley!!

Howard In Toronto

>Beautiful work.

Thank you for posting these photos.

BUT....

we need more.

More photos.

More design/construction/engineering details.

More ewverything.

Thank you!

Howard

Re: Pair of cabinets

#6

Beautiful!

Tony - Memphis

>

Re: Pair of cabinets

#7

Striking !

Yonak

>

Re: Pair of cabinets

#8

Wowsa!

Thomas Skaggs, Foothills of Mount Level

>Tom,

Home run man! Wonderful veneer work and the design is cool. I really like those!

Tom

Re: Pair of cabinets

#9

Alan Young

Drum ditty ditty dumbfounded!

Alan Young

>Can't beat those with a stick! Great looking cabinets Tom.

Very fun. Would love to see operating details.

Alan

Re: Pair of cabinets

#10

Re: WOW!!

Thomas S Stockton

>Doug

The door is hinged with a pair of butt hinges and the touch latch is a standard issue magnetic touch latch. I've never found anybody that makes a really nice furniture quality touch latch so I don't use them much but when a client request them I will, the ones on this cabinet are made by Sugastone and are OK quality but still are a chunk of plastic.

Tom

Re: Pair of cabinets

#11

Re: how did you???

McKay

>How did you do the stave joints around the top? Are they biscuited, tenoned?

Re: Pair of cabinets

#12

Re: how did you???

Thomas S Stockton

>Bent the sides on a form in a vacuum press. The core was bending luan(wiggle board) and a couple of layers of bending poplar and are attached to the legs with biscuts.


img

Re: Pair of cabinets

#13

Re: Pair of cabinets

George@Colonel's Workshop-Havertown PA

>Good Afternoon Tom,

Those really are extraordinary. I'd never have the patience. I'm sure you are more than pleased with your achievement.

George

Re: Pair of cabinets

#14

Oh my!

Joanne Adler in Pt. Pleasant, PA

>These are spectacular! These are fine, indeed. I'll bet you even exceeded your client's and your own expectations. Well done!

Re: Pair of cabinets

#15

Dale Lenz

Re: WOW!!

Dale Lenz

>Beautiful piece of work, for sure! If you Google "brass touch latch*" you will find a few brass touch latches.