Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

HVLP question

Posts

HVLP question

#1

HVLP question

Theresa

>I was wondering how long a Waterbased Poly can be in the HVLP gravity gun. Do I have to clean it every time between coats? That would be a hassle, but I would if I have to.

Thanks in advance for any advice.

Re: HVLP question

#2

Re: HVLP question

Ed Mulligan, Cape Cod

>I clean at the end of the day. I might have sprayed a dozen or more coats on various items during the day. I'd never let the gun go uncleaned overnight with waterborne stuff in it.

I use Target Ultra lacquer in an Accuspray #10 gun.

Ed

Re: HVLP question

#3

Thanks Ed!

Theresa

>

Re: HVLP question

#4

Re: Thanks Ed!

Barryvabeach

>Theresa, remember the check the tip if you don't clean the gun after each use. I get a little build up on the tip sometimes between coats when spraying waterbase, and if you see some build up try to flick it off with a finger nail or it may impact the spray pattern.

Re: HVLP question

#5

Re: Thanks Ed!

Theresa

>I learned that after a break between sprayings.

It was easy to take care of, as you described.

Thanks Barry!

Re: HVLP question

#6

Spray tip

Ed Mulligan, Cape Cod

>Ditto the little buildup of crud right at the nozzle opening.

I've been spraying with Target USL for 5 years now. Early on I did have a buildup of dried lacquer inside the nozzle tip that eventually degraded the spray pattern. Now I remove the tip and check it from time to time but haven't seen a repeat of that situation.

Ed