Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Need practice sawing dovetails........?

Posts

Need practice sawing dovetails........?

#1

Need practice sawing dovetails........?

Bill Tindall, E.TN

>.....build a trunk. I'm getting plenty (and needing every hour of it). 17 feet of dovetail sawing in this trunk I am building. Wrist is sore and saw dull. If I was doing oak trunks for a living I would be buying a bigger heaver saw than the LN dovetail saw. The piece in the PIC is the back panel.

I do a mix of hand and machine work, as well as use the bench for "farm repairs". So the bench is just a big flat surface with vices on the corners. I get around not having the fixtures of a traditional bench by use of clamps. The 2 x 2 clamped to the bench provides support for the piece being sawed. I have problems hitting the back scribe line so I find it faster to used a crutch. I clamp a stick to the back along the scribe line. When I have sawed to it I know the back is right on the line. The 200 foot candles of light I have at bench height comes in handy for following the pen line. I mark with a gel pen. It shows up vastly better than pencil.


img

Re: Need practice sawing dovetails........?

#2

Admire your patience!

Paul Leuba

>

Re: Need practice sawing dovetails........?

#3

Re: Need practice sawing dovetails........?

Don Orr

>Very nice Bill. I've never seen the use of your crutch. I like it very much as I often can't hit the back line either. Thanks for the tip and looking forward to the finished product.