Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Counter top designated to glue-ups

Posts

Counter top designated to glue-ups

#1

Counter top designated to glue-ups

Ken-Middle Tennessee

>It seems like a while back I've seen pictures of a counter top designated only to glueing up boards together. How would I go about doing this? What top would be best to scrape excess glue off? Is there a clamping system that would help make things go easy? I was wondering how you guys/gals would do it if you had space designated for glue ups. Thanks for any advice.

Re: Counter top designated to glue-ups

#2

JL

Re: Counter top designated to glue-ups

JL

>I have a sacrificial counter top which consists of tempered hardboard or masonite (~1/4" thick) in a hardwood frame. The hardboard has a couple of applications of tung oil/polyurethane rubbed into it.

I also have a few rolls of polyethylene film. I cut off a piece and use that to cover my work bench to protect from glue or finish.

Not many have enough space to set aside a counter top for glue-ups only :).

Re: Counter top designated to glue-ups

#3

film

John K Jordan

>>...I also have a few rolls of polyethylene film.

JL,

Just to let you know, I've been getting a lot of use out of the rolls of film. Not only for glue-ups but for many other things. I used some of the foil-backed stuff as insulation and a moisture/insect barrier under plywood in the walls, floor, and ceiling when I built a feed/tack room in my old barn. Thanks for the lifetime supply!

JKJ

Re: Counter top designated to glue-ups

#4

I LOVE . . .

steve mackay

>my bench of Melanex ( ? ), That white shelving and counter stuff from The Borg. M-E-L-A-something. I origanaly built it for SWMBO to do greenware. I thought her paints would wash right off. I inheritaed the bench and use it for assembly. Glue comes right off with a dull putty knife and leaves no scratches to speak of. Tough stuff. Have'nt found a paint that won't come off including asphaltum. Its also very stable and very flat. At least for my needs. It was worth the investment ( even more NOW ! ).

Re: Counter top designated to glue-ups

#5

no need for special space

Bill Tindall, E.TN

>I put a layer of newspaper on the bench. Apply glue and clamp a panel. Set the panel assembly off the bench standing up some out of the way place. With my clamps the panels stand up ok. I sometimes glue many panels at a time and this procedure works efficiently for me.

Re: Counter top designated to glue-ups

#6

Re: Counter top designated to glue-ups

Larry Marker

>I have a piece of "tile board" that I put on my bench when I'm doing glueups. That's the cheap melamine coated hardboard the borgs sell for bathtub enclosures and the like. Get one that's smooth and not the ones that try to look like tile. Glue pops right off when it's dry.

Larry

Re: Counter top designated to glue-ups

#7

Me too

Ed Mulligan, Cape Cod

>I have a sheet of melamine I lay on top of my bench for messy procedures - glueups, finishing etc.

Ed

Re: Counter top designated to glue-ups

#8

Re: Counter top designated to glue-ups *LINK*

Bob Lemon Sacramento Ca.

>Ken, One of our woodworking members built a great multipurpose glue-up/worktable with built in clamp and glue storage. It is featured in a Fine Woodworking magazine and in a book they publish.

Here is a link to the preview of the book. - With pictures of the table.


Multipurpose glue up table

Re: Counter top designated to glue-ups

#9

Re: Hardboard Panel--the brown stuff--

Kneale Brownson dreaming of snow in N. MI

>Cut to fit the top of my tablesaw and extensions. Nice, solid, flat spot that's always there. Dried glue comes off with a scraper most times. Get one side too dug up from the scraper and start using the other. It'll last for quite a few projects and is inexpensive to replace. The used stuff still is good enough to make dust panels for dressers, etc.