Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Poly compatibility question

Posts

Poly compatibility question

#1

Poly compatibility question

Nat Robison

>I'm refinishing the floors in my house and I've used a less-expensive WB Poly for the first 2 coats. I'd like to use a slightly more expensive Varathane WB Poly for the last 2 coats.

Any compatibility problems that anyone can foresee? Also, if I have to stretch the gallon of Varathane, can I mix in some of the less-expensive poly (as long as I don't do it mid-coat)?

I haven't used WB Poly (and would probably choose oil-based if there were no other considerations) on a floor before but the ability to do 2 coats in a day coupled with a spouse who has an abnormally low tolerance for household projects swayed me.

Re: Poly compatibility question

#2

Re: Poly compatibility question

waroland

>What about testing a small piece overnight and see for youself if there is a problem. I think you will find that it will be okay.

My2c

Re: Poly compatibility question

#3

Re: Poly compatibility question

Steve Schoene

>Why do you think that the lower priced product is inferior? It may be but....?

Re: Poly compatibility question

#4

Re: Poly compatibility question

Nat Robison

>Good Point. I don't know that it's inferior. I did a floor once with Varathane oil-based and I was impressed with it, that's why I was thinking of topcoating with Varathane. I could probably just finish the job with the poly I started with and it would be fine.....and it would put the compatibility issue to rest.

Re: Poly compatibility question

#5

Re: Poly compatibility question

Howard Acheson

>There will be no compatibility problems with one waterborne applied over another manufacturers waterborne as long as the prior finish has fully dried and is scuff sanded.

Do not mix two different manufacturer's products. Waterborne acrylic finishes are made in a number of different processes and mixing could very easily cause problems.

What do you think makes one finish "better" than another?

Re: Poly compatibility question

#6

Re: Poly compatibility question

Alexander Grigoriev

>Have you tried Zar Ultra Max (waterborne oil-modified poly)? It gives you warm tone, while drying very quickly for the next coat.

On the other hand, it doesn't have aluminum oxide additive for wear resistance. If you want that, use Varathane Diamond Floor Finish.