Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

painting concrete floor

Posts

painting concrete floor

#1

painting concrete floor

howard

>I am only covering part of the shop floor with wood. the floor is a 4" slab and is 4 weeks old. is it cured enough for me to paint and what product would you recommend, i've seen some of these epoxy based type coatings. thanks for your suggestions.

Re: painting concrete floor

#2

Re: painting concrete floor

Larry Clinton At Frankfort (Central)., Indiana

>I used the Rustoleum Garage floor epoxy coating (available at the Borg's) on my shop floor about 3 years ago. It has done a marvelous job. I like the looks - it is the grey base coat with the sprinkle color chips. The chips seem to give it a little "grip" (of course I don't have a wet floor) and I never slip with sawdust on the floor. I move just about all my equipment on mobile bases including a 20" planer, 8" Grizzly joiner, Unisaw with extension table, MM16 band saw. None have cut through the coating, although I do have a few scratches where I caught something in the wheel of the big planer and slid it across the floor. I don't really think any coating I could have put down would have worked any better. I did clean my floor very thoroughly before applying - scrubbed it with an "orange cleaner" then used the cleaner with the kit.

Re: painting concrete floor

#3

Re: painting concrete floor

Fred Davis

>I used Porter Paint two part epoxy on my garage floor , I think probably any major brand will do the trick when the floor is ready.

If you did not spray the concrete after troweling with a curing compound then the water in the concrete is still evaporating and will for sometime longer then four weeks. This will interfere with adhesion if to much water is present .

You can test for this by taping a small square of clear plastic to the floor . I

If you see water forming like sweat under the plastic, then it needs to cure longer.

A large barn fan blowing across it will speed it up and you can rent these if you don't want to buy one.

About the surface of the paint after it dries, if you apply it with a roller , it will texture paint with tiny pimples that makes a great nonskid floor covering.

FredD

Re: painting concrete floor

#4

Re: painting concrete floor

del schisler

>which out what kind of paint you use I would get some textured or non skid What ever that is Saw dust and painted floors It is like ice SLICK as you can get Sure don't need I fell and can't get up

Re: painting concrete floor

#5

Re: painting concrete floor

Victor Parisian

>agree, 4 weeks is too soon.

victor

Re: painting concrete floor

#6

Thanks.....................

howard

>I'm not in a hurry so I can give it the time it needs to cure. I'll look at the exposy based products when the timing is right.

thanks